help!!!
Thread Starter
Intermediate
Joined: Feb 2007
Posts: 48
Likes: 0
From: houston texas
help!!!
ok heres what i need to do by pass the ac compressor on my cross fire injection.Has anyone eals done this if so what size belt was it.Now for the reson why i need to do this becuz the bottem bolt that holds the ac compressor broke off part of it in the block of the engin. I cant get it out try and ez out all that stuff the shops wanan pull the eing i say **** that.or if some one in hoston knows what there doing and coulde help someoen out lol might be a 24 pack in it 
lol
thanks Andrew
lolthanks Andrew
Pro
Joined: Sep 2006
Posts: 702
Likes: 2
From: Conyers Ga
Exactly which extraction tools have you tried? Is any portion of the bolt exposed so you can grab it? If so, soak it...no DROWN it in wd40 or someother type of penetrating oil for a few hours then try grabbing it.
You might be able to drill it out then re-tap the hole.
You might be able to drill it out then re-tap the hole.
