, but what is a dremal tool, and where can I buy one at? thnks
11 second LT1 ??
Thread Starter
Le Mans Master
Joined: Dec 2004
Posts: 5,488
Likes: 1,352
http://rides.webshots.com/photo/1102...39559089xAfoaQ
Here's what it should look like when you're done.
Here's what it should look like when you're done.
Thread Starter
Le Mans Master
Joined: Dec 2004
Posts: 5,488
Likes: 1,352
You don't need one,a drill and a jigsaw or a good pair of tin snips will work just fine. You can buy a dremel which is a name brand rotary tool. Sears, Harbour freight, Lowes, Home Depot all sell them. You can also buy a cut lid so you can keep your original one uncut for $40.00 from Mid America.
Instructor
Joined: Mar 2005
Posts: 148
Likes: 0
From: Georgetown Ontario
my set up is different being a 6spd,but the only engine work I have is the hotcam kit mated to a full exhaust.I have not gotten an 11 sec pass(low 12's) due to my crappy 1.90 60' time, however I am trapping a hair shy of 115mph.So I'm in the group that says you dont have to go crazy to acheive 11's,with out the help of nitrous.
Le Mans Master
Joined: Aug 2004
Posts: 5,141
Likes: 7
From: Metairie Louisiana
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Large Impressive Member
Joined: Jul 2003
Posts: 65,811
Likes: 71
From: Good health is merely the slowest possible rate at which one can die
St. Jude Donor '04-'05-'06-'07
Unfortunately, I don't have a 1/4 mile track less than a three hour drive from me. But my 1/8th mile times tell me that 11s are right there. I run the Hotcam but it's on a 388 stroker with worked heads. I don't use NO2. I also have only 3.07 gears and so I believe that a Hotcammed 350 could hit 11s with proper gearing and such with no problem.
Racer
Joined: Oct 2006
Posts: 283
Likes: 0
The Hotcam has a nice lope but it's not radical.
Unfortunately, I don't have a 1/4 mile track less than a three hour drive from me. But my 1/8th mile times tell me that 11s are right there. I run the Hotcam but it's on a 388 stroker with worked heads. I don't use NO2. I also have only 3.07 gears and so I believe that a Hotcammed 350 could hit 11s with proper gearing and such with no problem.
Unfortunately, I don't have a 1/4 mile track less than a three hour drive from me. But my 1/8th mile times tell me that 11s are right there. I run the Hotcam but it's on a 388 stroker with worked heads. I don't use NO2. I also have only 3.07 gears and so I believe that a Hotcammed 350 could hit 11s with proper gearing and such with no problem.
.
Le Mans Master
Joined: Apr 2000
Posts: 5,713
Likes: 105
From: Manassas VA
