Headlight question?
Safety Car
Joined: Jul 2003
Posts: 4,928
Likes: 1
I bought the bushings from Home Depot first but they turned out to be too thin and not strong enough. It caused the headlights to bounce like crazy at the point where they were supposed to stop. I bought some from Lowes that were a little thicker and stronger and haven't had a problem since.
I removed the whole assembly then removed the motor which seemed easier than trying to get the motor out with it in the car.
I removed the whole assembly then removed the motor which seemed easier than trying to get the motor out with it in the car.
1st Gear
Joined: Dec 2006
Posts: 1
Likes: 0
Headlight removal
I am have an extremely hard time getting the 10MM nuts lose to remove the headlight assembly and do not want to snap off the studs that are mounted in the hood. Anybody know of any tricks to get them
removed?
removed?
Team Owner
Joined: Oct 2000
Posts: 96,443
Likes: 9
From: Fort Knox, KY
Cruise-In IV Veteran
Cruise-In VI Veteran
Cruise-In VII Veteran
Cruise-In VIII Veteran
