1998 chevy van engine
Le Mans Master
Joined: Sep 2006
Posts: 6,050
Likes: 147
From: Phoenix AZ
2021 C4 of the Year - Modified Finalist
old man's junk yard?
wait a minute......... you have the goose with the golden egg here.
you have a junk yard?
excuse me ......wrecking yard?
the 88-89-90 camaro-firebird had the cast iron heads. but the center 2 bolts are at different angles. I'd use the truck swirl ports as an experiment in low speed torque. they run out of air at 4000 RPM. get creative, and put the shim head gaskets on it
But....
just go get one of those engines, put your cam in it, add new lifters and bolt your intake on it, change the flywheel/flexplate and keep going.
oh and you will have to change the pan also.
and no not all engines are drilled for the pump shaft and the bolt holes aren't drilled. Just the pad is still cast into the block.
why are you wasting your time here? it should have been done already
you have a junk yard?
excuse me ......wrecking yard?
the 88-89-90 camaro-firebird had the cast iron heads. but the center 2 bolts are at different angles. I'd use the truck swirl ports as an experiment in low speed torque. they run out of air at 4000 RPM. get creative, and put the shim head gaskets on it
But....
just go get one of those engines, put your cam in it, add new lifters and bolt your intake on it, change the flywheel/flexplate and keep going.
oh and you will have to change the pan also.
and no not all engines are drilled for the pump shaft and the bolt holes aren't drilled. Just the pad is still cast into the block.
why are you wasting your time here? it should have been done already
Last edited by coupeguy2001; Mar 30, 2007 at 12:08 AM.
Thread Starter
Intermediate
Joined: Nov 2006
Posts: 48
Likes: 0
ok the van engine is out .I had a look at it today and its a 305
Now I was out back in the junk yard today.I came across two firebirds
1 1971 1/2 camaro.Four 1979 chevy pickups with 350 engines.amd a monte carlo.Now what car do think will have the best engine.
Now I was out back in the junk yard today.I came across two firebirds
1 1971 1/2 camaro.Four 1979 chevy pickups with 350 engines.amd a monte carlo.Now what car do think will have the best engine.
Race Director
Joined: Sep 2000
Posts: 17,298
Likes: 33
From: The Top of Utah
Assuming they are all pre-1986, they will all bolt in and accommodate your Crossfire intake, with no head or flexplate change. With no more details, it is impossible to advise a choice. I'm guessing condition and mileage would be the deciding factors. What has happened to the $500.00 rebuild mentioned in the Parts For Sale/Wanted Section?
RACE ON!!!
RACE ON!!!
Team Owner
Joined: May 2002
Posts: 24,337
Likes: 25
From: San Diego , CA Double Yellow DirtBags 1985..Z51..6-speed
Race Director
Joined: Sep 2000
Posts: 17,298
Likes: 33
From: The Top of Utah
VIN code "R" engines were introduced in 1996. The fuel pump boss existence is a non-issue for this thread. Her 1984 has it, but she isn't using it. Whether a replacement engine has the boss or not is not relevant in this case.
RACE ON!!!
RACE ON!!!
Thread Starter
Intermediate
Joined: Nov 2006
Posts: 48
Likes: 0
As for the engine rebuild .My engine is in the shop now.Im going to stroke it out.Im not gong to use the old heads so im looking around to see waht is going to work best.I also want to put a cam in so thats on my list to look into.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
