supercharging info
Melting Slicks
Joined: Dec 2000
Posts: 2,719
Likes: 59
From: Fremont Oh
It pretty much depends on how much power you want to run...
If you want to run the stock bottom end, you can run 6~8 pounds of boost with an FMU or a boost a pump. Many folks are doing that...
You may want to consider water methanol injection, larger injectors i.e. 36-42 poundrers. Again depends how far and serious you want to get...
If you have more specific queestions please feel free to email or PM me...
Regards,
MO
If you want to run the stock bottom end, you can run 6~8 pounds of boost with an FMU or a boost a pump. Many folks are doing that...
You may want to consider water methanol injection, larger injectors i.e. 36-42 poundrers. Again depends how far and serious you want to get...
If you have more specific queestions please feel free to email or PM me...
Regards,
MO
Safety Car
Joined: May 2003
Posts: 4,283
Likes: 0
From: Houston Texas
Go to www.blowerworks.net. If you are looking for a great all around kit and don't want to do much if any fabrication, this is the place to go. Down to every nut and bolt.
Melting Slicks
Joined: Feb 2006
Posts: 2,240
Likes: 0
From: Cleveland OHIO
For the cost of the supercharger you could do a nice heads and cam package with tuning and the supporting mods to go along with it.
If your car is stock and and an auto you could go with gears and a converter and pick up nearly a full second in the 1/4
If your car is stock and and an auto you could go with gears and a converter and pick up nearly a full second in the 1/4
