Wiper help
Thread Starter
Instructor
Joined: Jun 2005
Posts: 119
Likes: 0
From: Ringgold Georgia
Wiper help
I removed my pulse circuit board during a recent motor swap. Now after re-assembly the wipers do not appear to work. Have I lost a part? Is there a removable pin I am missing. Is there somewhere I can look and see how this should go together? This is very exasperating.
Drifting
Joined: Aug 2006
Posts: 1,624
Likes: 2
From: Canandaigua New York
Did you cycle the motor before you attached the control arm?
You need to cycle the motor a couple of times so it 'parks' in the correct position when you shut it off. Then attach the arm and it should be right.
You need to cycle the motor a couple of times so it 'parks' in the correct position when you shut it off. Then attach the arm and it should be right.
