Rear Spindle Nut Size?
Thread Starter
CF JASOC Member
Joined: Feb 2006
Posts: 8,040
Likes: 34
From: Downtown Annapolis, MD. The Future is where we all have to live. Let's not screw it up.
St. Jude Donor '08-'09-'10-'11
Rear Spindle Nut Size?
Anyone know the socket size to remove the rear spindle nut on an '88 so I can replace the rear wheel bearing and hub assembly?
Already have the #55 torx bit to remove the hub.
The biggest 1/2 drive socket I have is 1 1/8 and that's way too small.
Thanx
Already have the #55 torx bit to remove the hub.
The biggest 1/2 drive socket I have is 1 1/8 and that's way too small.
Thanx
36mm 84-96
Thread Starter
CF JASOC Member
Joined: Feb 2006
Posts: 8,040
Likes: 34
From: Downtown Annapolis, MD. The Future is where we all have to live. Let's not screw it up.
St. Jude Donor '08-'09-'10-'11
Thanx guys.
Now I can let the WD40 soak for another day while I get the socket.
Now I can let the WD40 soak for another day while I get the socket.
Thread Starter
CF JASOC Member
Joined: Feb 2006
Posts: 8,040
Likes: 34
From: Downtown Annapolis, MD. The Future is where we all have to live. Let's not screw it up.
St. Jude Donor '08-'09-'10-'11
Yes I do have some as a matter of fact. Incredible stuff to be sure. Got it from a friend that owns an industrial print shop. I only use it for special (read problem) projects. I'll break it out if the WD40 doesn't do the trick. Thanx for checking.
