Header installation cost
Le Mans Master
Joined: Jan 2003
Posts: 5,858
Likes: 7
From: Santa Maria CA
No. The shop gave me BS horror stories about having to raise my motor etc. The only "mod" I really had to do was notch the raised corner of this cross brace. It was hitting the header and not letting me align the bolt holes. Plus $500 was almost what I paid for the headers new to begin with.
Drifting
Joined: Apr 2007
Posts: 1,339
Likes: 2
From: port charlotte fl
That's very true 'tho I have pulled the motor and rebuilt it along with the tranny.C5 brakes,new rear end,suspension,fabricated my own exhaust.Complete new interior and even painted it myself in my garage.All on my lonesome and at my age.There's not much of it that I've not either worked on or replaced.As for "always bragging" I'm too old to brag about anything.I own an '87 Lingenfelter,period.
Thread Starter
Team Owner
Joined: Nov 2000
Posts: 29,689
Likes: 9
From: Central Florida
Jax Events Coordinator
CI 3-4-5-6-7-8-9 Veteran
St. Jude Donor '03-'08
All the years I've been here and I still don't understand why people open topics they have no interest in making a contribution to.
There are many threads on headers. I researched them and came to the decision on which one I wanted to buy. I also did a search on "header installation cost" and came up with nothing. Considering the fact that I don't have the time to turn wrenches and would prefer not to get screwed, I thought it wise to inquire what others had paid to have the job done. Regardless, I shouldn't have to justify any post to anyone.
For the rest of you, thanks for the numbers.
There are many threads on headers. I researched them and came to the decision on which one I wanted to buy. I also did a search on "header installation cost" and came up with nothing. Considering the fact that I don't have the time to turn wrenches and would prefer not to get screwed, I thought it wise to inquire what others had paid to have the job done. Regardless, I shouldn't have to justify any post to anyone.
For the rest of you, thanks for the numbers.
Racer
Joined: Sep 2004
Posts: 495
Likes: 0
From: berwick pennsylvania
my point here is i would like to see more people doin there own work on there cars. it is very enjoyable and gratifying to pick a project and set a goal and complete it all on your own.if you dont have the time fine but dont beat my a** for saying it should cost you nothing to install headers on your car but time. you ask and i told you what i thought. and for that i have been called a noob and douche bag.. you need not justify anything to me. its your money
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Race Director
Joined: Oct 2004
Posts: 14,863
Likes: 0
From: In a pineapple under the sea.
St. Jude Donor '06-'07-'08-'09
CI 8-9-10 Veteran
