Hotcam question
Melting Slicks
Joined: Jun 1999
Posts: 2,872
Likes: 3
From: Wilmington NC
Re: Hotcam question (torchred96)
heres my hot cam dyno graph with headwork done and all the goodies mentioned above that badazz is looking to get!! this number at no point is below stock and is rearwheel horsepower and RWTQ, the dip towards the end is a mystery, im thinking its do to reverberation in the exhaust at that frequency but also noticed that on Nathan's car he had it too.. may be a characteristic of the cam itself perhaps... will have to look into it! hot cam specs are 218/228 .525"/.525" (1.6 rockers) and a 112 LSA.
good luck,
chris
:cheers:
[Modified by lcvette, 8:03 AM 12/12/2001]
good luck,
chris
:cheers: [Modified by lcvette, 8:03 AM 12/12/2001]
