where does this go?

Reply Subscribe

Thread Tools

Search this Thread

Jul 9, 2008 | 09:58 PM

BONNOUGHJ

Thread Starter

Instructor

Joined: Jan 2008

Posts: 124

Likes: 0

From: HASKINS OH

where does this go?

I was looking over the motor today, and I noticed that there was a wire with a plug on it that was plugged into any thing.. Where should it go?

THANK YOU

JEREMY

Last edited by BONNOUGHJ; Jul 9, 2008 at 10:39 PM.

Jul 9, 2008 | 10:40 PM

BONNOUGHJ

Thread Starter

Instructor

Joined: Jan 2008

Posts: 124

Likes: 0

From: HASKINS OH

ok,, I fixed the photos. You should be able to see them now.

THANKS
JEREMY

Jul 9, 2008 | 11:13 PM

pianoguy

Safety Car

Joined: May 2007

Posts: 3,651

Likes: 10

From: Apple Valley MN

If I'm looking at the right wire, it goes to a sensor of some sort on the master cylinder (maybe brake fluid level monitor?), just below the brake line fittings.

Jul 9, 2008 | 11:14 PM

81c3

Le Mans Master

Joined: Dec 2005

Posts: 8,574

Likes: 961

From: Communist Colorado

Should be a sensor on the brake master that it plugs into.

Jul 10, 2008 | 08:40 AM

BONNOUGHJ

Thread Starter

Instructor

Joined: Jan 2008

Posts: 124

Likes: 0

From: HASKINS OH

I'll look again, but I think that there is anther wire coming out of the same harness that allready goes to the master cylinder. I was looking at it.

JEREMY

Jul 10, 2008 | 02:28 PM

pcolt94

Le Mans Master

Joined: Jan 2006

Posts: 5,621

Likes: 206

From: Orlando FL

Two connectors go the master. One for the low fluid sensing, and the other for the proportion valve. It senses the valve has not moved to one side indicating some sort or hydraulic failure in one of the brake systems. It goes low on the master where the indicator switch screws into the metal base of master.