When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
I am looking for a engine, mine is about to bite the dust. I keep seeing LT1 engines for sale for Camaro's, etc.., but they all say they will not fit the vette, WHY?
I thought the only difference between the 2, was the 2 bolt main for the camaro and the vette had a 4 bolt main.
The accessories and other bolt ons have differences between the B, F and Y bodies..
The short block on B, F and Y are the same and heads on the F and Y bodies are the same, so just use the shortblock/heads from the camaro and use all the other parts from your vette and you should be fine.
The accessories and other bolt ons have differences between the B, F and Y bodies..
The short block on B, F and Y are the same and heads on the F and Y bodies are the same, so just use the shortblock/heads from the camaro and use all the other parts from your vette and you should be fine.
The Y lt1 has a 4 bolt main and F body has 2 bolt. I suppose the OP could switch the acc brackets and put it in correct?
Wasn't the HB different on the F body too? I know they do not swap and IIRC it sticks out farther not sure if the crank is longer or not or if you can swap the hub and balancer from a 'Vette to the F LT1.
Wasn't the HB different on the F body too? I know they do not swap and IIRC it sticks out farther not sure if the crank is longer or not or if you can swap the hub and balancer from a 'Vette to the F LT1.