Injector install 95
Thread Starter
Pro
Joined: Jul 2002
Posts: 514
Likes: 0
From: ceres ca
St. Jude Donor '08
Injector install 95
Getting resdy to install my Bosch III's. Want to make sure, on LT it's put them in fuel rail first and L98 into manifold first, correct?
Thanks in advance
Randy
Thanks in advance
Randy
Supporting Vendor
Joined: Mar 2008
Posts: 1,762
Likes: 14
From: Cumming Ga
randy put them in the manifold first.. Then lube the o ring with Vaseline. Set the rail back over the injectors and start each one past the bottom of the rail. Once they are all in, push the rail slowly down till it seats on the stands. Put the 4 rail bolts in with anti seize and torque to specs. Pressurize the rail and inspect for leaks. No leaks ,fire it up, inspect again for leaks, once you are satisfied that there are no leaks, put back the rail covers and go for a ride. Any questions call my cell 770 842 0882
