Clutch Tightness
Thread Starter
Racer
Joined: Nov 1999
Posts: 294
Likes: 69
From: Yorktown Heights New York
Clutch Tightness
Ok ..Im stupid..But Before I start mucking with the pedal, can someon show a pic or define what the part is to replace (plastic Bushing) to make the clutch pedal soft again? 
Burning Brakes
Joined: Feb 2002
Posts: 871
Likes: 1
From: Union KY
Re: Clutch Tightness (Corvette_116)
Sorry True Blue ya gotta do better with describing your problem. By soft, do you mean that it requires less leg force to depress versus more when it's stiff? Cire96 :)
Team Owner
Joined: Mar 2001
Posts: 54,124
Likes: 30
From: Cincinnati, Oh USA
Re: Clutch Tightness (Corvette_116)
The clutch pedal has a pin sticking out to the right which goes through the hole in a clevis at the end of the clutch master cylinder shaft. On this pin is a plastic bushing. If the plastic bushing splits, the shaft will want to go off at an angle which increases the pedal throw to disengage the clutch and also increases the force required to operate the clutch pedal.
