shifter knob removal???
Thread Starter
Intermediate
Joined: Jan 2010
Posts: 41
Likes: 0
From: Greer sc
shifter **** removal???
Am trying to replace the console cover on my 85 automatic. How do you get the darn shifter **** off?. I can pop the shifter button but there is a thin piece of metal about 1 1/2 inches long that apparently holds the **** on that I cant get off. Anyone know how to remove this other than a tractor pull? Thanks in advance.
Drifting
Joined: Feb 2009
Posts: 1,302
Likes: 2
From: colchester CT
it is held in by a ring/clip. you need the ringclip pliers to get it out. It is at the base of the shifter. there is a hole on each end of the clip that accepts the ends of the pliers. I know my terminology is wrong here but hopefully you get the gist. I have done it a lot, its easy with the right pliers
Thread Starter
Intermediate
Joined: Jan 2010
Posts: 41
Likes: 0
From: Greer sc
it is held in by a ring/clip. you need the ringclip pliers to get it out. It is at the base of the shifter. there is a hole on each end of the clip that accepts the ends of the pliers. I know my terminology is wrong here but hopefully you get the gist. I have done it a lot, its easy with the right pliers
Race Director
Joined: Dec 2006
Posts: 10,383
Likes: 4
Race Director
Joined: Aug 2000
Posts: 11,470
Likes: 764
don't screw around with ice-picks, screwdrivers, or whatever - do yourself a favor - go out and buy the correct tool for the job. this is what i have - perfect size for the C4 gear shift **** snap ring. after the initial investment, you'll always have as part of your tool collection...
KLINE TOOLS #73242 SNAP RING PLIERS.
KLINE TOOLS #73242 SNAP RING PLIERS.
