Euro rear light install
Thread Starter
Melting Slicks
Joined: Jul 2004
Posts: 2,295
Likes: 14
From: Grand Sport #82
Euro rear light install
I am in the middle of installing the Euro rear lights, the ones with the 2/3 rear and 1/3 amber turn signal in one.
As I understand it, the first thing I need to do is cut the white wire going from the brake pedal switch, in orer to seperate the brake and turn signal.
I did that an expected the 4 rear brake lights to be dead, but the 3rd brake light still to light up. Instead there is no brake light at all on the car now. The plan was to feed the all brake light from the 3rd brake light.
Guys that have done this or know how to convert the rear harness to Euro style setup, please comment.
As I understand it, the first thing I need to do is cut the white wire going from the brake pedal switch, in orer to seperate the brake and turn signal.
I did that an expected the 4 rear brake lights to be dead, but the 3rd brake light still to light up. Instead there is no brake light at all on the car now. The plan was to feed the all brake light from the 3rd brake light.
Guys that have done this or know how to convert the rear harness to Euro style setup, please comment.
Team Owner
Joined: Jan 2003
Posts: 20,324
Likes: 250
From: Summerland B.C. Canada
Do you have a schematic for your year ?
On my 86, there are 2 wires exiting brake switch, one directly to 3rd light, the other through turn/hazard switch assembly, before heading to the other 4 lights.
On my 86, there are 2 wires exiting brake switch, one directly to 3rd light, the other through turn/hazard switch assembly, before heading to the other 4 lights.
