C4 Tech/Performance L98 Corvette and LT1 Corvette Technical Info, Internal Engine, External Engine

Knock question

Thread Tools
 
Search this Thread
 
Old 09-14-2010, 12:46 AM
  #1  
bcollid
Advanced
Thread Starter
 
bcollid's Avatar
 
Member Since: Jun 2009
Location: St. Louis Missouri
Posts: 90
Likes: 0
Received 0 Likes on 0 Posts
Default Knock question

Question regarding knock.

I am pretty happy with the tune I have on my 383./ 89 corvette

So over the past couple of days I've been data logging more aggressive driving to make sure there's no holes in the tune.

I find that when I down shift and smash the gas hard, the data log shows 1 knock count but no knock retard( which I know to be active)

Does this sound like a real knock or a false reading from the knock sensor?

I noticed this a couple of days ago, then I took a little spark advance out and today tried it again. I still get the 1 knock count.

I guess I could take more advance out and see if I still get the knock.

I was surprised I didn't see any knock retard.
Old 09-14-2010, 10:09 AM
  #2  
bjankuski
Safety Car
 
bjankuski's Avatar
 
Member Since: Sep 2001
Location: Glenbeulah Wi
Posts: 3,991
Received 466 Likes on 369 Posts

Default

One count is will not pull much retard and the scanner may not pick it up. It may be a false knock due to the sudden downshift and quick increase in engine speed. I would not worry about it too much.



Quick Reply: Knock question



All times are GMT -4. The time now is 04:05 PM.