OK, What's the trick!
Le Mans Master
Joined: Oct 2008
Posts: 9,758
Likes: 49
From: Houston Texas
Thread Starter
Burning Brakes
Joined: Mar 2002
Posts: 1,035
Likes: 0
From: Atlanta Ga
Man that is miserable! I picked up a set of crows fot wrenches and that didn't help me at all. I will say that is my first experience with a crow foot wrench but it just didn't give me enough room to get any leverage!
So, I had a 3/8" 1/4" drive socket from a cheap $5 socket set and I took my cut off tool and "Downsized" it! Took about 1/8" of the hex end, leaving just enough depth for a nut, this gave me just enough room to get in there with 1/4" drive tools.
What a pain!
So, I had a 3/8" 1/4" drive socket from a cheap $5 socket set and I took my cut off tool and "Downsized" it! Took about 1/8" of the hex end, leaving just enough depth for a nut, this gave me just enough room to get in there with 1/4" drive tools.
What a pain!
