Mat/iat
Thread Starter
Advanced
Joined: May 2008
Posts: 72
Likes: 0
From: Roanoke Rapids NC
Mat/iat
Does the plug for the IAT/MAT on the bottom of the Plenum come from the EGR solenoid or does that plug run up to the front air duct?????????????? Thanks Bo.....
PS yes I have one plug and 2 places to put it............LOL
PS yes I have one plug and 2 places to put it............LOL
Race Director
Joined: Nov 2003
Posts: 12,220
Likes: 446
From: Overland Park Kansas
2020 Corvette of the Year Finalist (appearance mods)
C4 of Year Winner (appearance mods) 2019
Thread Starter
Advanced
Joined: May 2008
Posts: 72
Likes: 0
From: Roanoke Rapids NC
Thanks.........one more for you!!!!!!!!!!!! on the bundle of wires going to the Throttle body.........there is a there is a 4 prong (IAC) valve an 3 prong (TPI) and a 2 prong......Where in the heck does the 2 prong go...........can not find it for the life of me........... also there is a sensor comming off the driver side air duct........it runs up to the drivers side fire wall and stops??????I know it should be a plug but I can not find that one either................................ Thanks Bo
Race Director
Joined: Nov 2003
Posts: 12,220
Likes: 446
From: Overland Park Kansas
2020 Corvette of the Year Finalist (appearance mods)
C4 of Year Winner (appearance mods) 2019
IIRC, There is a 2-prong connector for the AIR router. If yours doesn't have the AIR pump system anymore, that's your extra plug.
Can't figure out what you mean by the other question. But the ESC and tack wires are also on the firewall.
Plus, oil pressure/sender and your MAT connection.
O2 sensor too IIRC.
Can't figure out what you mean by the other question. But the ESC and tack wires are also on the firewall.
Plus, oil pressure/sender and your MAT connection.
O2 sensor too IIRC.
