91 EPROM help needed PLEASE
FYI: Only symptom is the car's check engine light is flashing
thanks so much in advance,
Sully
Last edited by Sully1882; Apr 25, 2012 at 03:34 PM.
http://www.thirdgen.org/techboard/di...nual-bins.html
You must log in to download the file.
One option is some one could burn you a new chip. Then purchase the Moates Memory adapter.
You plug the Moates adapter into your current Mem Cal Module. This bypasses the on board Eprom.
This should work as long as the Limp Home Mode circuitry on your Mem Cal Module is good. (Most likely it is).
He also sells a adapter board that allows you to read the Eprom on the
Mem CAl module with out unsoldering it but I'm not sure if the Eprom
can be reprogrammed using this adapter.
http://www.moates.net/g1-memory-adap....html?cPath=64
http://www.moates.net/hdr1-memcal-he....html?cPath=64







