replaceing pads, and rotors

Reply Subscribe

Thread Tools

Search this Thread

Mar 22, 2014 | 04:01 AM

pastamike

Thread Starter

Instructor

Joined: May 2010

Posts: 243

Likes: 0

replaceing pads, and rotors

replacing front and rear pads and rotors on my 1996 coup. just wondering going to order new hardware kits too. is it one kit per wheel or one kit for the front and one for the rear..i'm also replacing the hoses too..

thanks again. gezzzz seems lately I'm on here a lot bugging people for help...

pasta mike..

Mar 22, 2014 | 06:49 AM

WW7

Le Mans Master

Joined: Aug 2007

Posts: 8,735

Likes: 412

From: WV

Each kit should do 2 wheels.. I have an 89 vette and the kit I bought for the front has the 4 anti rattle clips, 2 pins and 2 clips... I have the Raybestos kit # H5613A for the front, but have never replaced or seen a kit for the rear....Most auto stores have, or can get the front kits......WW

Last edited by WW7; Mar 22, 2014 at 07:10 AM.

Mar 22, 2014 | 02:52 PM

pastamike

Thread Starter

Instructor

Joined: May 2010

Posts: 243

Likes: 0

Quote:

Originally Posted by WW7

thanks looked up parts at rock auto, and they show a kit for front and rear, the front like you said has pins and rattle clips, and the rear kit does show 4 rubber little boots and 4 bolts, and it was under parts for the 1996 c4... wondering now if i should just go with the front kit only then.. thanks for the input..

pasta mike

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump