Pulling The Engine
Thread Starter
Burning Brakes
Joined: Nov 2007
Posts: 1,213
Likes: 2
From: Cincinnati oh
Pulling The Engine
I am pulling the engine on my 85. I decided to pull the trans with it. I can not get the damn drive shaft bolts to budge. Any ideas?
Also do i need to remove the center console to remove the linkage?
Any one in southwest Ohio wants to help Im buying the beer!
Also do i need to remove the center console to remove the linkage?
Any one in southwest Ohio wants to help Im buying the beer!
Le Mans Master
Joined: Mar 2004
Posts: 5,107
Likes: 171
From: Dublin CA
The bolts should not be too tight. Suggest PB Blaster on the bolts and let them soak.
If it was me, I would leave the transmission. Have your removed the hood to pull the engine or are you lifting and pulling to the side. I pulled mine to the side and left the transmission. Much easier.
If it was me, I would leave the transmission. Have your removed the hood to pull the engine or are you lifting and pulling to the side. I pulled mine to the side and left the transmission. Much easier.
Thread Starter
Burning Brakes
Joined: Nov 2007
Posts: 1,213
Likes: 2
From: Cincinnati oh
The bolts should not be too tight. Suggest PB Blaster on the bolts and let them soak.
If it was me, I would leave the transmission. Have your removed the hood to pull the engine or are you lifting and pulling to the side. I pulled mine to the side and left the transmission. Much easier.
If it was me, I would leave the transmission. Have your removed the hood to pull the engine or are you lifting and pulling to the side. I pulled mine to the side and left the transmission. Much easier.
Thread Starter
Burning Brakes
Joined: Nov 2007
Posts: 1,213
Likes: 2
From: Cincinnati oh
