72151

Reply Subscribe

Thread Tools

Search this Thread

Jul 29, 2015 | 03:41 PM

Corvette72151

Thread Starter

Navigator

Joined: Apr 2015

Posts: 9

Likes: 0

72151

Can someone verify that either early (85 -88 ) vette intakes do not have the provision for the EGR pipe from the intake to the right exh manifold while the ( 89 -91) has the provision or did I end up buying a ported Camaro intake. It will not accept the EGR pipe that my 91 has. Any advice would be greatly appreciated.

Jul 29, 2015 | 03:50 PM

HAD2HAV2

Melting Slicks

Joined: Jan 2001

Posts: 2,996

Likes: 304

From: MOORESVILLE NC

I have a stock 88 L-98. It has the EGR pipe that connects to the passenger side exhaust manifold and the rear of the intake.

Jul 29, 2015 | 04:57 PM

WVZR-1

Team Owner

Joined: Sep 2003

Posts: 25,393

Likes: 2,741

What is the casting number of the intake manifold you bought? What is on the manifold you've removed from the car?

Jul 29, 2015 | 05:07 PM

Team Owner

Joined: Dec 2000

Posts: 21,094

Likes: 282

From: Phila., PA burbs

Pretty sure all L98 Vettes (85-91) had the EGR tube that runs from the exhaust to the intake.

Jul 29, 2015 | 06:22 PM

bjankuski

Safety Car

Joined: Sep 2001

Posts: 4,157

Likes: 554

From: Glenbeulah Wi

Quote:

Originally Posted by TA

Pretty sure all L98 Vettes (85-91) had the EGR tube that runs from the exhaust to the intake.

I agree.

Jul 29, 2015 | 06:37 PM

Joe C

Race Director

Joined: Aug 2000

Posts: 11,470

Likes: 764

Quote:

Originally Posted by TA

Pretty sure all L98 Vettes (85-91) had the EGR tube that runs from the exhaust to the intake.

I have an 85 WITHOUT an EGR tube running from the exhaust to the intake. intake manifold PN 14081005, and original to the car. pretty sure that feature started in 1986. I used to think it was an aluminum head thing, but iron head 86's had the tubes.

Last edited by Joe C; Jul 29, 2015 at 06:45 PM.

Jul 29, 2015 | 07:55 PM

13crewchief

2nd Gear

Joined: Jul 2014

Posts: 2

Likes: 0

Quote:

Originally Posted by Joe C

I agree. (also own an '85)

Jul 30, 2015 | 12:44 AM

Cliff Harris

Race Director

Joined: Apr 2002

Posts: 10,036

Likes: 346

From: Anaheim CA

The EGR tube started in 1986. I have one on my cast iron head '86, though it's not really needed. There is an exhaust passage from the head and the intake manifold has passages to use that passage from the head.