Jacobs mastermind ?
Thread Starter
Safety Car
Joined: Aug 2001
Posts: 3,892
Likes: 13
From: Pettis Performance 565 with two stages of Nitrous Supply nitrous 1.082, 4.61 at 155, 7.17 at 192
Jacobs mastermind ?
I have a 454 in my 69 that makes 450 rwhp and 470 rwt. I am going to do some head, intake and bigger cam work to get to 500 rwhp (Goal) I have a sportsman fogger plumbed into the intake manifold. I am running a 150 shot now. I was looking at the Jacobs mastermind and wondering if anybody is using it. I like the idea of rpm related nos flow. I would then run an rpm related 200 shot. What concearns me is the pulsing of the system. It seams like on a direct port injection system like mine the pulsing could be an issue.
Any real world experiance
Any real world experiance
Le Mans Master
Joined: Oct 1999
Posts: 9,713
Likes: 3
From: Sachse Texas
Cruise-In I Veteran
Cruise-In II Veteran
Re: Jacobs mastermind ? (69 N.O.X. RATT)
I would go with one of the other controllers over the Jacob's Mastermind.
http://forums.corvetteforum.com/zerothread?id=263000
It is a piece of junk in my experience.
http://forums.corvetteforum.com/zerothread?id=263000
It is a piece of junk in my experience.
Thread Starter
Safety Car
Joined: Aug 2001
Posts: 3,892
Likes: 13
From: Pettis Performance 565 with two stages of Nitrous Supply nitrous 1.082, 4.61 at 155, 7.17 at 192
Re: Jacobs mastermind ? (Vette92)
Thanks Vette 92, I read the post, what do you reccomend. Do you thiink the idea of rpm related flow is not doable.
Le Mans Master
Joined: Oct 1999
Posts: 9,713
Likes: 3
From: Sachse Texas
Cruise-In I Veteran
Cruise-In II Veteran
Re: Jacobs mastermind ? (69 N.O.X. RATT)
Unfortunately there are no other controllers that do RPM dependant activation that I know of. Both the NX and NOS brands run off of time based activation. The NX controllers are very nice though.
