Key chip
Melting Slicks
Joined: Oct 2016
Posts: 2,024
Likes: 363
From: Central Alabama
Our local locksmith doesn't want to be bothered with them.
I got the lady at Home Depot to cut it for free. Since you don't have a receipt you can't bring it back.
https://www.ebay.com/itm/OEM-Ignitio...915?rmvSB=true
Last edited by belairbrian; Dec 26, 2017 at 11:49 PM.
Thread Starter
Instructor
Joined: Aug 2017
Posts: 246
Likes: 6
Dude, you are da freakin man! My ebay searches only turned up aftermarket.
Now i gotta figure out which door key i need so i can get matching sets!!!
Of course those factory keys might not be on ebay. Who knows. You managed to find ecactly the one i need!
Now i gotta figure out which door key i need so i can get matching sets!!!
Of course those factory keys might not be on ebay. Who knows. You managed to find ecactly the one i need!
Melting Slicks
Joined: Oct 2016
Posts: 2,024
Likes: 363
From: Central Alabama
So an H key is correct.
You could order both from Ecklers. They have them in stock. But they cost a little more and then there is shipping.
Last edited by belairbrian; Dec 27, 2017 at 10:33 AM.
Intermediate
Joined: Sep 2017
Posts: 29
Likes: 3
From: Cheyenne WY
I just had extras made at the local locksmith. $14/key and they matched the door key to the ones they cut. Originals went to the house and I use the aftermarkets.
When I took they key in, they saw what it was and everyone who worked there picked a number and put a dollar up. The guy who guessed right got the $7 and had to pick up donuts the next day....Guess it is a tradition for them
It was at lest amusing....
When I took they key in, they saw what it was and everyone who worked there picked a number and put a dollar up. The guy who guessed right got the $7 and had to pick up donuts the next day....Guess it is a tradition for them
It was at lest amusing....
Last edited by Mavinwy; Dec 27, 2017 at 03:52 PM.
Thread Starter
Instructor
Joined: Aug 2017
Posts: 246
Likes: 6
Weird reading
So i checked the chip in my other 96. Same meter. Same setting. When it finaly settled down, the reading was .070. I have not found a chart with 070 as a key choice.
What are your thoughts?
What are your thoughts?
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Thread Starter
Instructor
Joined: Aug 2017
Posts: 246
Likes: 6
Were watching you.
Locksmiths dont have factory GM keys. In a couple more days, i will have 3 sets of GM keys for roughly twice what you gave for your 1 set of generic aftermarket keys. Now if this were a Camaro or mudstain, id be fine with aftermarket keys. But this is a Corvette. So....
Locksmiths dont have factory GM keys. In a couple more days, i will have 3 sets of GM keys for roughly twice what you gave for your 1 set of generic aftermarket keys. Now if this were a Camaro or mudstain, id be fine with aftermarket keys. But this is a Corvette. So....
Safety Car
Joined: Jun 2006
Posts: 4,007
Likes: 1,488
From: Ashland, OH
Were watching you.
Locksmiths dont have factory GM keys. In a couple more days, i will have 3 sets of GM keys for roughly twice what you gave for your 1 set of generic aftermarket keys. Now if this were a Camaro or mudstain, id be fine with aftermarket keys. But this is a Corvette. So....
Locksmiths dont have factory GM keys. In a couple more days, i will have 3 sets of GM keys for roughly twice what you gave for your 1 set of generic aftermarket keys. Now if this were a Camaro or mudstain, id be fine with aftermarket keys. But this is a Corvette. So....
Safety Car
Joined: Jun 2006
Posts: 4,007
Likes: 1,488
From: Ashland, OH
What you’ll pay vs what the market brings isnt a discussion. What I find humorous is you calling a car ‘mudstain’ (Your basically ragging on the car.......its ok we all have likes and dislikes) today brings double and triple what you stick your chest out to say ‘this is a Corvette’.
Thread Starter
Instructor
Joined: Aug 2017
Posts: 246
Likes: 6
I think you are creating something where there was none prior.
Where does your logic end? Clean Fiero Mera is rarer and more collectable than your fox body or my C4. Again. The my daddy is tougher than your daddy thing, is tired.
If your panties bunched over the mudstain reference ,( notice i calitalized Camaro in the initial thread) then car guys are prolly not your peeps.
But for the record, please accept my apologies for entering your safe space and hurting your feelers.
Can we get back to man to man discussions about man stuff now?
Where does your logic end? Clean Fiero Mera is rarer and more collectable than your fox body or my C4. Again. The my daddy is tougher than your daddy thing, is tired.
If your panties bunched over the mudstain reference ,( notice i calitalized Camaro in the initial thread) then car guys are prolly not your peeps.
But for the record, please accept my apologies for entering your safe space and hurting your feelers.
Can we get back to man to man discussions about man stuff now?
Racer
Joined: Mar 2017
Posts: 288
Likes: 13
From: Engelhard NC
for the key
https://www.ebay.com/itm/1986-1996-C...BVwF47&vxp=mtr
for the resistance
Here's a list of possible pellet values I got from another forum member.
Pass Key Codes:
Key……….…...Ohms
.1………….….... 392
.2………….….... 523
.3……………..… 681
.4………….…..…887
.5…………….…1.13k
.6…………….…1.47k
.7……………….1.87k
.8……………….2.37k
.9……………….3.01k
10………………3.74k
11………………4.75k
12………………6.04k
13………………7.50k
14………………9.53k
15……………..11.80k
https://www.ebay.com/itm/1986-1996-C...BVwF47&vxp=mtr
for the resistance
Here's a list of possible pellet values I got from another forum member.
Pass Key Codes:
Key……….…...Ohms
.1………….….... 392
.2………….….... 523
.3……………..… 681
.4………….…..…887
.5…………….…1.13k
.6…………….…1.47k
.7……………….1.87k
.8……………….2.37k
.9……………….3.01k
10………………3.74k
11………………4.75k
12………………6.04k
13………………7.50k
14………………9.53k
15……………..11.80k
