Plug wire installation
Drifting
Joined: Jan 2002
Posts: 1,608
Likes: 0
From: I Hate Tourists FL
Re: Plug wire installation (Rick8110)
I had to remove the shrouds in the wheel well. Jack the car up and slide my arm up next to the oil pan to reach the driver side of the dist. Then replace the one at a time starting at the top and route them individually. It takes a while but that is how I did it.
Safety Car
Joined: Jun 1999
Posts: 3,570
Likes: 3
From: Austin, Singapore, Kuala Lumpur, Houston, Dallas, Hong Kong, Elgin, etc.. Texas
Re: Plug wire installation (STL94LT1)
I've done the wires from the bottom and from the top. Definitely doing them from the top is easier. You have to remove a few bolts to get things out of the way, but its still much easier.
I suggest doing a search on the subject as its been covered many times over the past year and instructions are quite detailed. Plan on spending a few hours doing it.
I suggest doing a search on the subject as its been covered many times over the past year and instructions are quite detailed. Plan on spending a few hours doing it.
