HYPERTECH coil kit in!
Thread Starter
Team Owner
Joined: Feb 2000
Posts: 51,504
Likes: 6
From: Sacramento CA
HYPERTECH coil kit in!
I put teh coil kit in last night and went for a drive
I was worried they'd ship it UPS and it wouldn't be here by next week, frmo RENO, but It came fED-ex and was here next day :lol:
Threw a new plug in #7 too, which stay unfouled for almost 40 miles.
Overall the car is a lot smoother.
SOTP increase? Maybe... but the old cap/coil/rotor was the cheapest crap I could buy.
I was worried they'd ship it UPS and it wouldn't be here by next week, frmo RENO, but It came fED-ex and was here next day :lol:
Threw a new plug in #7 too, which stay unfouled for almost 40 miles.
Overall the car is a lot smoother.
SOTP increase? Maybe... but the old cap/coil/rotor was the cheapest crap I could buy.
Le Mans Master
Joined: Mar 2001
Posts: 9,464
Likes: 1
From: Modesto CA
Re: HYPERTECH coil kit in! (Kale)
http://store.summitracing.com/partdetail.asp?part=11396
Mine broke too. :cheers:
Mine broke too. :cheers:
Thread Starter
Team Owner
Joined: Feb 2000
Posts: 51,504
Likes: 6
From: Sacramento CA
Re: HYPERTECH coil kit in! (TIMSPEED)
http://store.summitracing.com/partdetail.asp?part=11396
Mine broke too. :cheers:
Mine broke too. :cheers:
Also last night, I took off to go in to the garage and the car felt like i ran over something and have to give it a little more throttle.
my friend said from the outside it was like a KWUMP kind of noise
:confused:
Team Owner
Joined: Dec 2000
Posts: 90,675
Likes: 304
From: SE NY
Cruise-In II Veteran
Re: HYPERTECH coil kit in! (Kale)
You might want to pull the dist cap and put a little Lock Tite on those two nulon screws that hold the rotor.
I've had no problem with the Vette but one worked loose in the IROC.
Also, try a set of AC Delco plugs with cut back ground electrodes for the HP gain; with the HyperTech setup gap the plugs to .045" too.
Did you also do a set of low resistance spiral-would wires too?
I've had no problem with the Vette but one worked loose in the IROC.
Also, try a set of AC Delco plugs with cut back ground electrodes for the HP gain; with the HyperTech setup gap the plugs to .045" too.
Did you also do a set of low resistance spiral-would wires too?
Le Mans Master
Joined: Jan 2002
Posts: 5,320
Likes: 4
From: Kyle TX (Because Mojo Made me fill it in)
Re: HYPERTECH coil kit in! (JD 90 383)
Ill be interested in the Holley Module and Hypertech cap/rotor/coil. Let me know and I can help and fund your upgrade :).
Glad to hear it.
Too bad you couldn't have waited ;) My stock distributor is coming out, and I'll prolly sell it(Holley module, hypertech cap-coil etc).
Too bad you couldn't have waited ;) My stock distributor is coming out, and I'll prolly sell it(Holley module, hypertech cap-coil etc).
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
