1985 Export Tail light wiring
Thread Starter
Pro
Joined: Apr 2014
Posts: 719
Likes: 67
From: Helotes Texas
1985 Export Tail light wiring
Hey guys finally decided to go with my Export lights over my red LED's. I'm about 90% done the turn signals function perfectly, my inboard red's are currently only working as running lights.
My brake lights don't function. I currently have a separate wire coming from the "light blue" wire on the brake switch all the way back to the inboard tail lights pressing the switch won't turn them on if I reconnect the "White Wire" the outboard lights will come on when pressing the brake switch so I know the connection at the brake switch is at least functioning.
I thought I was following the instructions that I received a few years ago but perhaps I wrote them down wrong, Any help is greatly appreciated.
**Edit** I noticed my out board lights have three wires and the inboards have 4 wires is this normal?
My brake lights don't function. I currently have a separate wire coming from the "light blue" wire on the brake switch all the way back to the inboard tail lights pressing the switch won't turn them on if I reconnect the "White Wire" the outboard lights will come on when pressing the brake switch so I know the connection at the brake switch is at least functioning.
I thought I was following the instructions that I received a few years ago but perhaps I wrote them down wrong, Any help is greatly appreciated.
**Edit** I noticed my out board lights have three wires and the inboards have 4 wires is this normal?
Last edited by L98Justin; Jul 17, 2020 at 01:30 AM.
