TP Sensor Learn Procedure

Reply Subscribe

Thread Tools

Search this Thread

Aug 12, 2020 | 01:51 PM

AgentEran

Thread Starter

Drifting

Joined: Apr 2014

Posts: 1,699

Likes: 231

From: Hawthorne CA

TP Sensor Learn Procedure

I have a P0123 and have determined I should perform the TP Sensor Learn Procedure as I have a new TB and TPS. FSM calls for a tech 1. Is this the only way? If so, how does one go about finding a shop that has a tech 1?

Aug 13, 2020 | 09:18 AM

fredk

Burning Brakes

Joined: May 2005

Posts: 920

Likes: 57

From: Muskoka Ontario

Use search, there are quite a few threads on this.

Aug 13, 2020 | 01:24 PM

AgentEran

Thread Starter

Drifting

Joined: Apr 2014

Posts: 1,699

Likes: 231

From: Hawthorne CA

Quote:

Originally Posted by fredk

Use search, there are quite a few threads on this.

Indeed. I adjusted the sensor with the screws, all is good now.

Aug 14, 2020 | 08:49 AM

fredk

Burning Brakes

Joined: May 2005

Posts: 920

Likes: 57

From: Muskoka Ontario

Awesome

Aug 14, 2020 | 10:58 AM

Nomake Wan

Drifting

Joined: Apr 2020

Posts: 1,925

Likes: 610

From: Orange, CA

Quote:

Originally Posted by AgentEran

At present, the Tech 1 is the only way to perform the TP Learn procedure for the ASR computer. However, adjusting TPS for the PCM can be done with just an ALDL cable and a laptop with free software. Or a multimeter. But making sure that 0% is 0% and 100% is 100% is usually adjusting the cable, and again, actually seeing the live data from the PCM helps tons.

The pandemic has ruined my ability to reverse engineer the Tech 1 since I was 'borrowing' a shop one for that, but as soon as I can get my hands on another one, I plan to get all those ABS/ASR commands so that we don't have to pay hundreds for a Tech 1 or more for a shop to do these sorts of things for us.

Best of luck.

Reply Subscribe

Reply Share

First
Prev
1 / 1
Next
Last

Forum Jump