Missing Lug Nut Adapter
Thread Starter
Burning Brakes
Joined: Sep 1999
Posts: 786
Likes: 31
Cruise-In II Veteran
Missing Lug Nut Adapter
About 3 years ago I had Tire Rack mount new tires on my 1990 roadster. Today I wanted to rotate the tires and looked for the lug nut security adapter and it was missing. I am assuming that Tire Rack never returned it because that is the last time I saw it.
Does anyone know where I can get a replacement?
Does anyone know where I can get a replacement?
Instructor
Joined: Aug 2016
Posts: 209
Likes: 24
Take it to a tire store. They will either have a universal lock key set (which you can buy for around $50 online) or if they don't have a key to fit they will beat a socket onto the nut and get it off that way. Then you can replace them with regular lug nuts. That's what we had to do with our 85. But the likely hood that you will be able to identify the right key and then find one for the factory locks is somewhere between slim to none. I believe that Amcor was the original manufacturer of the C4 locks. If they are still around you might be able to contact them for help. Personally I would get them off and throw them away. The only thing they are good for is keeping the owner from getting his tires off.
Team Owner
Joined: Aug 2004
Posts: 21,543
Likes: 3,216
From: Park City Utah
WVZR-1 is probably the BEST resource for identifying the correct lug lock "pattern" for your lugs.....but if it were MY car, I'd move on. I'd pound a 12 point socket onto that lock nut and rip it off with an impact...replace it w/a non-locking, lug nut and be done with that stuff.
Le Mans Master
Joined: Sep 2013
Posts: 6,192
Likes: 750
From: near the thumb in the mitten
There maybe a 2 x 2 card in owners packet with lock information. Locks are installed during prep and the lock id card is supposed to put in owners manual. Most dealer parts departments have a universal sets to id lock keys. From there either you or they will order it direct from the manufacturer. There are tools to remove them, a 7/8 12 point driven on with a hammer would take some type off.
Last edited by Kevova; Jul 5, 2021 at 12:40 PM.
Team Owner
Joined: Sep 2003
Posts: 25,394
Likes: 2,741
There's several places 'in the car' where it might have been placed, where was it before your Tire Rack service? Visit them and they'd likely remove for you. If you've bought more from them in the recent past I'd think they'd be inclined to help!
Take a snapshot of yours and see if you can match it to those from Amcor. They very well still offer them. It's unlikely that most dealers will still have complete sets but who knows - try them!
ID it from the Amcor snapshots and post an image and description here - many/most have moved on and might help you. For other than an NCRS future interest I'd say move on. Try here - I believe in '90 it was Amcor
https://www.amcorlocks.com
Call and ask Moe!!! He helped this guy!!
https://www.corvetteforum.com/forums...post1602328857
Take a snapshot of yours and see if you can match it to those from Amcor. They very well still offer them. It's unlikely that most dealers will still have complete sets but who knows - try them!
ID it from the Amcor snapshots and post an image and description here - many/most have moved on and might help you. For other than an NCRS future interest I'd say move on. Try here - I believe in '90 it was Amcor
https://www.amcorlocks.com
Call and ask Moe!!! He helped this guy!!
https://www.corvetteforum.com/forums...post1602328857
Last edited by WVZR-1; Jul 5, 2021 at 01:19 PM.
Safety Car
Joined: Mar 2017
Posts: 4,206
Likes: 1,325
From: LeClaire Iowa
WVZR-1 is probably the BEST resource for identifying the correct lug lock "pattern" for your lugs.....but if it were MY car, I'd move on. I'd pound a 12 point socket onto that lock nut and rip it off with an impact...replace it w/a non-locking, lug nut and be done with that stuff.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Drifting
Joined: Jun 2020
Posts: 1,355
Likes: 396
From: Northwest Ohio
My 93 came without the lug key much to my chagrin. I used a universal lug extractor socket (impact). I bought it from one of those cheapo auto parts stores. Popped them right off with the impact. The only pain was then extracting the lug from the extractor socket. What I did was grind two flat spots onto the lug base after removed, put it in a vice and then used the impact to spin it back off. Took about 20 minutes or so.
Drifting
Joined: Jun 2020
Posts: 1,355
Likes: 396
From: Northwest Ohio
Not to completely hijack but FWIW - especially lately, I’ve been getting a lot of “nice Vette” or “nice car” or “cool car” yelled at me randomly...entirely from kids/teens etc... maybe it’s the tint plus the corsa but I think there may be more younger folks than people realize that are into these cars/the look.
From what I’ve seen it tends to be older folks who turn up their noses at this generation Vette (those that could have bought them when they were in production).
I think this is also because they aren’t as commonly seen as they once were so seeing one as a younger person may be the only one you’ve ever seen/noticed before while those more experienced in life might go “oh another Barbie Vette whatever”
As to the saw blades, no I am not worried about them getting stolen and yes I am considering a wheel swap lol! Either c5z (with the black center and polished lip with the studs or real grand sport wheels if I can find them)
From what I’ve seen it tends to be older folks who turn up their noses at this generation Vette (those that could have bought them when they were in production).
I think this is also because they aren’t as commonly seen as they once were so seeing one as a younger person may be the only one you’ve ever seen/noticed before while those more experienced in life might go “oh another Barbie Vette whatever”
As to the saw blades, no I am not worried about them getting stolen and yes I am considering a wheel swap lol! Either c5z (with the black center and polished lip with the studs or real grand sport wheels if I can find them)
