SuperRam Install Complete
Race Director
Joined: May 2001
Posts: 14,165
Likes: 9
Re: SuperRam Install Complete (1320dance)
SUPERRAM WORTH MONEY IF SO WOULD LIKE FOR MY 96 [ANY ADVISE]
Team Owner
Joined: Mar 2000
Posts: 83,383
Likes: 87
From: Boston, MA
Re: SuperRam Install Complete (Nathan Plemons)
You can't put a super ram on your 96 and there wouldn't be a real reason for you to need it either. The super ram is a replacement for the extremely restrictive stock TPI intake setup. The LT1 intake will make a lot of power without ever touching it, you just need to skip directly to the heads / cam.
Yes you can. There is an LT1 version of the superram with the correct intake manifold bolt pattern. I wouldn't advise it, but you can.
Team Owner
Joined: Apr 2000
Posts: 27,818
Likes: 8
From: CT
SuperRam Install Complete (ski_dwn_it)
I checked out your site...that car is FAST with just the mods you have...holy COW. You should see some nice gains from the SR. Can't wait to hear how it does.. :thumbs:
If I'm not mistaken, Chuck is like the rest of us junkies! I think a 219 and some sort of improved cylinder head is finding it's way on to the car in the future.And why not? It's a good...tried and true combo.
:cheers:
Drifting
Joined: Jul 2001
Posts: 1,751
Likes: 1
From: Miami, FL, USA
Re: SuperRam Install Complete (Mike_D)
Good Job, those same guys really helped me out alot during my install also.. especially Scorp and Ski.
The SR runs real sweet and fires right up, and that great???
I'm waiting for Moroso Dragway to open on the 15 to get some times also, I will do a dyno, soon, but I am scared to find out that maybe it didnt get the HP I wanted...but maybe it will surprise me!
The SR runs real sweet and fires right up, and that great???
I'm waiting for Moroso Dragway to open on the 15 to get some times also, I will do a dyno, soon, but I am scared to find out that maybe it didnt get the HP I wanted...but maybe it will surprise me!
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
2027 Corvette vs The World: Every C8 vs Its Closest Competitor
Joe Kucinski
Thread Starter
Safety Car
Joined: Oct 2001
Posts: 4,763
Likes: 1
From: Connectivette
Re: SuperRam Install Complete (rats87)
I Put aside about 4 hours of time when I set out to put the Camber Brace on. I didn't need it. I completed the project in an hour including raising and lowering the car. A difference? You bet. Convertibles are a little sloppier than the coupes and really waranted buying one.
Race Director
Joined: May 2001
Posts: 14,165
Likes: 9
Re: SuperRam Install Complete (scorp508)
Yes you can. There is an LT1 version of the superram with the correct intake manifold bolt pattern. I wouldn't advise it, but you can.
Team Owner
Joined: Mar 2000
Posts: 83,383
Likes: 87
From: Boston, MA
Why in the world would anybody even make that?
Former Vendor
Joined: Jun 2001
Posts: 7,204
Likes: 6
From: St Marys PA
Re: (scorp508)
Why in the world would anybody even make that?
I dunno. It might of been pushed towards autocrossers to promote more low end. It is pictured in Lingenfelter's modifying SBC book a few places I believe.
I dunno. It might of been pushed towards autocrossers to promote more low end. It is pictured in Lingenfelter's modifying SBC book a few places I believe.
