Manifold access
Instructor
Joined: Jan 2021
Posts: 146
Likes: 37
Easiest to do it before assembly, but you can get to them for the most part if you pull just the plenum.
Melting Slicks
Joined: May 2014
Posts: 2,894
Likes: 592
From: New Port Richey FL
To change or install the Air sensor is pretty much impossible, if you forgot to plug it in can be done. I have done it but wished I hadn't forgotten it. You will need some long thin screwdrivers maybe some long needle nose pliers or real long forceps.
You have to toy the plug into the sensor, once lined up push it in with screwdriver.
I'm not sure about the EGR that might be doable but distributor might need to come out. Plenums are not hard to remove, more than once I have loosened one side and removed center.
You have to toy the plug into the sensor, once lined up push it in with screwdriver.
I'm not sure about the EGR that might be doable but distributor might need to come out. Plenums are not hard to remove, more than once I have loosened one side and removed center.
