When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
radiator is what you mean... take off the top shroud, disconnect tranny/coolant lines, remove the 3 bastard bolts at the bottom of the shroud on both sides and presto.. pull it out..
although i found i had to remove the fans as well.. :steering:
...remove the 3 bastard bolts at the bottom of the shroud on both sides and presto.. pull it out..
:iagree: Those are bastards. I removed them from under the front by grabbing the ends with pliers till they were finger loose. I used plastic expansion fasteners to replace them with. Next time I'll just pop the fasteners loose.