[HELP FOR FRIEND] Fastburn Heads.... QUICK?
Thread Starter
Melting Slicks
Joined: Jan 2002
Posts: 2,784
Likes: 3
From: Atlanta GA
[HELP FOR FRIEND] Fastburn Heads.... QUICK?
Hey Guys, My friend just purchased a set of Fastburn heads for his 84 Corvette (1991 SD TPI motor). As he attempted to put them on his car, he realized the runners were way to big and dont fit.
What are his options? Will a superram base work with this??? What can he do?
What are his options? Will a superram base work with this??? What can he do?
Safety Car
Joined: Sep 2001
Posts: 4,157
Likes: 554
From: Glenbeulah Wi
Re: [HELP FOR FRIEND] Fastburn Heads.... QUICK? (StealDads67)
He needs to purchase a Vortec TPI intake manifold from SDPC. The Vortec manifold will bolt up to the Fastburn heads, and the ports will line up.
Race Director
Joined: Aug 2002
Posts: 13,356
Likes: 0
From: tucson AZ
St. Jude Donor '04 & '05
Re: [HELP FOR FRIEND] Fastburn Heads.... QUICK? (StealDads67)
CrossFire's.....go to http://www.crossfire.webhop.net
to get more info.....
Sorry for his problem's......
But.......
tony
:eek: :eek: :blueangel:
to get more info.....
Sorry for his problem's......
But.......
tony
:eek: :eek: :blueangel:
Thread Starter
Melting Slicks
Joined: Jan 2002
Posts: 2,784
Likes: 3
From: Atlanta GA
Re: [HELP FOR FRIEND] Fastburn Heads.... QUICK? (oldace84)
I did some research after I posted this. And was reading up, He going to end up going with the Scoggin Dickeys Vortec base.....
Prolly have some nice potential. Get a superram upon that Vortec base plate and a nice cam.
Well see what happens. But he is going with the Vortec plate
Prolly have some nice potential. Get a superram upon that Vortec base plate and a nice cam.
Well see what happens. But he is going with the Vortec plate
