Part # for relocated IAT sensor?
Thread Starter
Le Mans Master
Joined: Apr 2000
Posts: 6,341
Likes: 1
From: Shelton CT
Part # for relocated IAT sensor?
I want to buy another one of these to relocate my Intake Air Temp sensor to the fornt of the intake. Anyone know if Autozone or someting to that effect sells one of those? I am looking for the plastic ones, not the metal ones that screws into the upper plenum.
thanks..
thanks..
Le Mans Master
Joined: Aug 2000
Posts: 5,192
Likes: 1
From: Airport Cruise-in 1 Veteran Airport Cruise-in 2 Veteran
Cruise-In II Veteran
Re: Part # for relocated IAT sensor? (MrNuke)
I'm pretty sure I bought mine from LPE.
I don't see it on their website though. :skep:
I don't see it on their website though. :skep:
Drifting
Joined: Mar 1999
Posts: 1,931
Likes: 1
From: Norcross GA
Re: Part # for relocated IAT sensor? (MrNuke)
The metal one was used in the L98. It was called a MAT. (Manifold Air Temp)
The plastic one was used on the LT1. It is called IAT. (Inlet Air Temp)
Grab one from an LT1.
You do know, relocating the sensor on an L98 doesn't do anything (real), right?
The plastic one was used on the LT1. It is called IAT. (Inlet Air Temp)
Grab one from an LT1.
You do know, relocating the sensor on an L98 doesn't do anything (real), right?
Le Mans Master
Joined: Jul 2002
Posts: 5,818
Likes: 2
From: Alive and well in Burlington NC
Re: Part # for relocated IAT sensor? (MrNuke)
Don't know if this is the one you want or not. It's for a 91 from Autozone.
Unit Price: $7.99
Core Value*: $0.00
Part No.: SU109
Weight: 0.1 lbs.
Warranty: 3 MO
Availability: Online: Ships within 2 business days
Store: Normally Stocked
Unit Price: $7.99
Core Value*: $0.00
Part No.: SU109
Weight: 0.1 lbs.
Warranty: 3 MO
Availability: Online: Ships within 2 business days
Store: Normally Stocked
Thread Starter
Le Mans Master
Joined: Apr 2000
Posts: 6,341
Likes: 1
From: Shelton CT
Part # for relocated IAT sensor?
Thanks everyone. I'll be picking it up locally by the looks of things. I forgot it was plastic on the LT1's. I knwo it is not a major mod, but it helps a bit due to the colder air it sees entering the intake, and since the superram runs quite cooler than my stop TPI used to, it might be worth a degree of timing advance or two. I've been running mine a bit far down the intake by the ram air scoop, but I'll put it farther up in front of the TB, for a mroe precise temp measurement. I just want a spare one in case I 'F' mine up.
Thanks everyone. :D
Thanks everyone. :D
Thread Starter
Le Mans Master
Joined: Apr 2000
Posts: 6,341
Likes: 1
From: Shelton CT
Re: Part # for relocated IAT sensor? (montie98)
Nah I doubt it, but for that all you need is an LT1 IAT sensor (about $15) and the wiring that goes from the connector to the new location.
I just needed a spare IAT sensor. (The plastic one).
I just needed a spare IAT sensor. (The plastic one).
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski