Problems with hood support??????????????
Thread Starter
Burning Brakes
Joined: Aug 2002
Posts: 779
Likes: 0
From: West Point Utah
Problems with hood support??????????????
Ok I bought everthing I needed to upgrade my 84 to a 96 body style bumpers, inner wheel wells, lights the works. :D. I started on changen the right side inner wheel wells.Have them all change looking good :thumbs: But the hood support bracket and Rod won't fit :skep:Whats Up any body know :confused: EDMGUY.
[Modified by EDMGUY, 9:15 AM 10/12/2003]
[Modified by EDMGUY, 9:15 AM 10/12/2003]
Team Owner
Joined: May 2002
Posts: 24,337
Likes: 25
From: San Diego , CA Double Yellow DirtBags 1985..Z51..6-speed
Re: Problems with hood support?????????????? (EDMGUY)
My '85 hood has provisions for the later style hood prop. But, I do know the '84 has a different hood. Do they claim it's supposed to be a bolt-on for your '84?
Race Director
Joined: Feb 1999
Posts: 12,772
Likes: 17
From: Indianapolis IN
Re: Problems with hood support?????????????? (EDMGUY)
I had to take off the exsisting 1985 bracket and bolt on the new style of bracket then I trimmed off some of my bracket off and bolted it on over top of the new bracket.
I can emil you pics if you like.
I can emil you pics if you like.
Race Director
Joined: Feb 1999
Posts: 12,772
Likes: 17
From: Indianapolis IN
Re: Problems with hood support?????????????? (EDMGUY)
Check your email!
You need to take the bracket off that is currently mounted on a 45 Degree angle then put the new hinge bracket on in its place,,,, then hack saw the bracket you took off so it will clear the new hinge,,, and bolt it back ontop of the new hinge,,, clear as mud?
[Modified by ld85, 10:24 AM 10/13/2003]
You need to take the bracket off that is currently mounted on a 45 Degree angle then put the new hinge bracket on in its place,,,, then hack saw the bracket you took off so it will clear the new hinge,,, and bolt it back ontop of the new hinge,,, clear as mud?
[Modified by ld85, 10:24 AM 10/13/2003]
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Top 10 Corvette Engines RANKED by Peak Torque (70+ Years of Muscle!)
Joe Kucinski
Corvette ZR1X Will Be Pacing the Indy 500, And Could Probably Race, Too!
Verdad Gallardo
Top 10 Corvettes Coming to Mecum Indy 2026!
Brett Foote
Top 10 C9 Corvette MUST-HAVES to Fix These C8 Generation Flaws!
Michael S. Palmer
10 Revolutionary 'Corvette Firsts' Most People Don't Know
Joe Kucinski
5 Reasons to Upgrade to an LS6-Powered Corvette; 5 Reasons to Stay LT2
Michael S. Palmer
Thread Starter
Burning Brakes
Joined: Aug 2002
Posts: 779
Likes: 0
From: West Point Utah
Re: Problems with hood support?????????????? (EDMGUY)
id85 I hate to be a pain but can you send me some pics of the upper bracket and mount location if you have any Thanks EDMGUY
Race Director
Joined: Feb 1999
Posts: 12,772
Likes: 17
From: Indianapolis IN
Re: Problems with hood support?????????????? (EDMGUY)
Thread Starter
Burning Brakes
Joined: Aug 2002
Posts: 779
Likes: 0
From: West Point Utah
Re: Problems with hood support?????????????? (ld85)
Thanks thats a big help. :thumbs: The 84 has a differnt lay out than a 85 but I can make work .Brackets will be here 10/16/2003.This is going to be soooo :cool: .EDMGUY
Thread Starter
Burning Brakes
Joined: Aug 2002
Posts: 779
Likes: 0
From: West Point Utah
Re: Problems with hood support?????????????? (EDMGUY)
Ok completed the install on my 84 Corvette Had to extend the lower bracket
and reinforced the air intake for the TBI's.But was not to bad. And it woks so much better. thanks id85 for the help.
[Modified by EDMGUY, 7:32 PM 10/19/2003]
and reinforced the air intake for the TBI's.But was not to bad. And it woks so much better. thanks id85 for the help.
[Modified by EDMGUY, 7:32 PM 10/19/2003]
