Roller Rocker Conversion Delayed Again
Thread Starter
Team Owner
Joined: Jan 2003
Posts: 20,275
Likes: 236
From: Summerland B.C. Canada
Roller Rocker Conversion Delayed Again
Damn, another delay. Last weekend was wiped out due to G.M. not getting their shipment due to weather.
This weekend wiped out due to the fact I don't have enough shims to get my installed spring height correct.
Intake required only 2/100" shim.
Exhaust requires 12/100" shim.
The exhaust alone will eat up all my shims plus :smash:
This is probably due to the lack of rotators on the LT4 setup. Oh well, it's still winter wonderland here so another short delay won't kill me. :cry :D
:cheers: Here's a couple of pics of the LT4 springs and the roller rockers in position so I could see how much of the centerbolt tower has to be shaved to accomadate the rockers.
[Modified by AGENT 86, 1:30 PM 2/8/2004]
This weekend wiped out due to the fact I don't have enough shims to get my installed spring height correct.
Intake required only 2/100" shim.
Exhaust requires 12/100" shim.
The exhaust alone will eat up all my shims plus :smash:
This is probably due to the lack of rotators on the LT4 setup. Oh well, it's still winter wonderland here so another short delay won't kill me. :cry :D
:cheers: Here's a couple of pics of the LT4 springs and the roller rockers in position so I could see how much of the centerbolt tower has to be shaved to accomadate the rockers.
[Modified by AGENT 86, 1:30 PM 2/8/2004]
