[Z06] Air Intake
Le Mans Master
Joined: May 2005
Posts: 6,366
Likes: 249
From: Fort Lauderdale, Florida
At $500 you are right at the Callaway Honker price. Excellent fit, quality and instructions, plus makes great power. Relocates the MAF closer to the throttle body, as GM followed suit on the C6. Must be something to that. It is the only intake kit that comes with a sticker proving emissions compliance in all fifty states.
3rd Gear
Joined: Oct 2005
Posts: 3
Likes: 0
From: Mount Airy Maryland
I am having a Callaway Honker installed as we speak. Tony at Tony's Corvette in MD. recommends this set-up over any of the others you have mentioned. Better quality construction better performance and HP gains. (by the way Tony has one of the top ten Corvette shops in the country.) JMHO.
Drifting
Joined: May 2004
Posts: 1,941
Likes: 1
From: Central CA
Originally Posted by FLYNAVY30
hmmm....maybe Ill sell it and just get a blackwing....my 02Z put down 368 to the wheels with a blackwing and nothing else
I installed mine in a very short time.... Basically the first time I've worked on a car before... and it was easy, very good instructions come with it and its not hard at all...
Here is a shot of the finished product:
And a shot of the two air bridges... this pic is crappy but you get the idea:
Burning Brakes
Joined: Sep 2004
Posts: 922
Likes: 0
From: Dallas TX
Originally Posted by sandmanusd
Seriously... I don't specifically have anything against the Blackwing, but the Haltech Stinger has basically the identical air box, but it also comes with a freer flowing and bigger air bridge, not to mention you can get red to match..
I installed mine in a very short time.... Basically the first time I've worked on a car before... and it was easy, very good instructions come with it and its not hard at all...
Here is a shot of the finished product:
And a shot of the two air bridges... this pic is crappy but you get the idea:
I installed mine in a very short time.... Basically the first time I've worked on a car before... and it was easy, very good instructions come with it and its not hard at all...
Here is a shot of the finished product:
And a shot of the two air bridges... this pic is crappy but you get the idea:
Advanced
Joined: Oct 2004
Posts: 66
Likes: 0
From: tracy ca
Originally Posted by F1_SS
I really want the TRAP, but halltech only make the stinger intake. I wonder if there is just the last piece i can buy to make the stinger into a TRAP.
Burning Brakes
Joined: Sep 2004
Posts: 922
Likes: 0
From: Dallas TX
Originally Posted by countryblue
have the same set up.but was told to keep stock set up when time to do the smog....G
Advanced
Joined: Oct 2004
Posts: 66
Likes: 0
From: tracy ca
Originally Posted by F1_SS
Where did you get the extra piece to make the stinger into a TRAP? We dont have smog here in TX so i can get away with it.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Team Owner
Joined: Mar 2005
Posts: 20,933
Likes: 905
From: salem OR
Originally Posted by e-hodges
MY FAVORITE MOD!!!!!
Cost --- at the most 4 bucks
Do the world famous, works every time, 15 minutes total to complete.....
ZIP TIE MOD
Cost --- at the most 4 bucks
Do the world famous, works every time, 15 minutes total to complete.....
ZIP TIE MOD