Problem with vent control.
Thread Starter
Race Director
Joined: Jan 2002
Posts: 14,185
Likes: 286
From: Shitcago IL
St. Jude Donor '04-'05-'06-'07-'08
Problem with vent control.
I have a 98 with the manual AC controls. The temp **** works, the fan speed works, but the vent position switch doesn't it blows thru all the opening no matter where I turn it. 
Racer
Joined: Jun 2006
Posts: 401
Likes: 0
From: FL
I had the same problem on my 98, but with the electronic controls. Mine was due to the little vacuum line on the back of the intake manifold being disconnected. I had to pull the manifold to get back there to reconnect it, but it's worked perfectly ever since. I don't know if the manually-controlled A/C has the same setup, but you might want to take a look. Kind of a PITA, but not particularly difficult to fix. Good luck!
Instructor
Joined: Jun 2006
Posts: 176
Likes: 0
From: Charlotte NC
I had this issue - fixed today.
Battery acid ate thru my vacuum line completly - it was located under the battery tray.
I conntected the broken ends with some 1/8 vacuum line then taped the ends up.
Easy easy fix.
Battery acid ate thru my vacuum line completly - it was located under the battery tray.
I conntected the broken ends with some 1/8 vacuum line then taped the ends up.
Easy easy fix.
Thread Starter
Race Director
Joined: Jan 2002
Posts: 14,185
Likes: 286
From: Shitcago IL
St. Jude Donor '04-'05-'06-'07-'08
Originally Posted by Taldir
I had this issue - fixed today.
Battery acid ate thru my vacuum line completly - it was located under the battery tray.
I conntected the broken ends with some 1/8 vacuum line then taped the ends up.
Easy easy fix.
Battery acid ate thru my vacuum line completly - it was located under the battery tray.
I conntected the broken ends with some 1/8 vacuum line then taped the ends up.
Easy easy fix.
