to swap out a set of SSR's for Ruff wheels
Ruff Wheels
Thread Starter
Instructor
Joined: Jan 2004
Posts: 175
Likes: 0
From: Loughborough, UK
Front lip is 3", rear is 4", and I must say they look even better in person.
It's like I have a different car, I've had so many people shout compliments at me its unreal.
I liked the look of the polished thin spokes I had before but they were a little small for the car and they were starting to show some severe pitting as my car is a DD and here in the UK tonnes of rock salt are used each winter to keep the roads from freezing = this all means corrosion.
I may put the old thin spokes back on for use in winter.
I'm not sure what they weigh but I can tell you that it is not excessive, I did a crude comparison against stock thin spokes and they are not ridiculously heavy in comparison.
It's like I have a different car, I've had so many people shout compliments at me its unreal.
I liked the look of the polished thin spokes I had before but they were a little small for the car and they were starting to show some severe pitting as my car is a DD and here in the UK tonnes of rock salt are used each winter to keep the roads from freezing = this all means corrosion.
I may put the old thin spokes back on for use in winter.
I'm not sure what they weigh but I can tell you that it is not excessive, I did a crude comparison against stock thin spokes and they are not ridiculously heavy in comparison.
Last edited by corvettecentral; May 6, 2007 at 06:09 PM.
Burning Brakes
Joined: Jun 2004
Posts: 1,164
Likes: 0
From: Edmond Ok
I got 19's (chrome 280's) all the way around... Also from Adriano on recommendation from ccajun4real here on the forum. Anyway, it was 38 lbs fr / 40 lbs rear for wheels and tires aired up according to the fedex label. Which still makes them almost identical in weight to my 17/18 wagon wheels with tires. So I wouldn't worry much about weight. Fit wasn't a problem on mine either, should have pics one of these days...
Drifting
Joined: Oct 2006
Posts: 1,947
Likes: 8
From: Redwood City CA
Safety Car
Joined: Sep 2000
Posts: 3,517
Likes: 529
From: Tampa, FL
Cruise-In III Veteran
Cruise-In IV Veteran
Cruise-In V Veteran
Just got mine, but have not mounted them.
It is cloudy and raining outside so the lights are from my garage
I have a small issue with 2 of the wheels and waiting for a response.
See where the paint goes past the edge here
It does not do that on the other 2, its a nice crisp line
I have emailed pics to the vendor to see, If i can get some money back and clean the paint off myself I may do it. Not sure what I could do though. It does not appear that the lip is clearcoated, would I just get some fine grit paper to clean it up?
This sucks because Discount Tire called and said my tires are in
Mike
It is cloudy and raining outside so the lights are from my garage
I have a small issue with 2 of the wheels and waiting for a response.
See where the paint goes past the edge here
It does not do that on the other 2, its a nice crisp line
I have emailed pics to the vendor to see, If i can get some money back and clean the paint off myself I may do it. Not sure what I could do though. It does not appear that the lip is clearcoated, would I just get some fine grit paper to clean it up?
This sucks because Discount Tire called and said my tires are in
Mike
Race Director
Joined: Nov 2003
Posts: 11,061
Likes: 38
From: Menifee CA
Just got mine, but have not mounted them.
It is cloudy and raining outside so the lights are from my garage
I have a small issue with 2 of the wheels and waiting for a response.
See where the paint goes past the edge here
It does not do that on the other 2, its a nice crisp line
I have emailed pics to the vendor to see, If i can get some money back and clean the paint off myself I may do it. Not sure what I could do though. It does not appear that the lip is clearcoated, would I just get some fine grit paper to clean it up?
This sucks because Discount Tire called and said my tires are in
Mike
It is cloudy and raining outside so the lights are from my garage
I have a small issue with 2 of the wheels and waiting for a response.
See where the paint goes past the edge here
It does not do that on the other 2, its a nice crisp line
I have emailed pics to the vendor to see, If i can get some money back and clean the paint off myself I may do it. Not sure what I could do though. It does not appear that the lip is clearcoated, would I just get some fine grit paper to clean it up?
This sucks because Discount Tire called and said my tires are in
Mike
omg, that looks bad....
Drifting
Joined: Oct 2004
Posts: 1,633
Likes: 0
From: Fremont/Menlo Park Ca
Drifting
Joined: Mar 2005
Posts: 1,404
Likes: 0
From: Ham Lake MN
ok, new shoes installed
See here
http://forums.corvetteforum.com/show....php?t=1703095
Love the, it was a problem with the 2 wheels, the vendor took care of it no problem
Mike
See here
http://forums.corvetteforum.com/show....php?t=1703095
Love the, it was a problem with the 2 wheels, the vendor took care of it no problem
Mike
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
