[Z06] changing clutch, PP, flywheel
Racer
Joined: Aug 2003
Posts: 293
Likes: 1
From: Staten Island New York
I'm also changing out my clutch in the future, I would apprerciate the DIY. email: Zee06@si.rr.com
Thanks, Patrick
Thanks, Patrick
Racer
Joined: Dec 2006
Posts: 371
Likes: 9
From: Manteca CA
St. Jude Donor '09
Racer
Joined: Sep 2005
Posts: 272
Likes: 1
From: North Carolina
Need to change mine too....
Could you also forward instruction to me. I thought my tires were spinning,,,,,until i smelt clutch material burning and not rubber.
crandles@suddenlink.net
crandles@suddenlink.net
Advanced
Joined: Nov 2007
Posts: 92
Likes: 0
From: Norridge IL
I'm changing out my clutch in the future, I would apprerciate the DIY. email: Stelth3d@netzero.com
Thanks in advance
Thanks in advance
Thread Starter
Pro
Joined: Jan 2005
Posts: 556
Likes: 0
From: Jacksonville FL
St. Jude Donor '06-'09
Well, i'm finally taking the plunge and doing this but.....
My buddy sent to a guy that has offered to the job for 400 if I furnish everything. He has a lift and does this all of the time.
I think my friend negotiated a great deal for me as a past favor payback honestly.
I have a slave cylinder on order and I have everything else.
I will let you know how it turns out.
Thanks for all of the good advice and good luck to all of you guys that are tackling this project on your own.
My buddy sent to a guy that has offered to the job for 400 if I furnish everything. He has a lift and does this all of the time.
I think my friend negotiated a great deal for me as a past favor payback honestly.
I have a slave cylinder on order and I have everything else.
I will let you know how it turns out.
Thanks for all of the good advice and good luck to all of you guys that are tackling this project on your own.
3rd Gear
Joined: Dec 2006
Posts: 3
Likes: 0
Can I get a copy of those instructions as well, please. Please forward them to MklCruz@yahoo.com. Thanks!
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Safety Car
Joined: Apr 2007
Posts: 3,586
Likes: 0
From: Lynn Haven, FL Sunshine State
St. Jude Donor '08
Well, i'm finally taking the plunge and doing this but.....
My buddy sent to a guy that has offered to the job for 400 if I furnish everything. He has a lift and does this all of the time.
I think my friend negotiated a great deal for me as a past favor payback honestly.
I have a slave cylinder on order and I have everything else.
I will let you know how it turns out.
Thanks for all of the good advice and good luck to all of you guys that are tackling this project on your own.
My buddy sent to a guy that has offered to the job for 400 if I furnish everything. He has a lift and does this all of the time.
I think my friend negotiated a great deal for me as a past favor payback honestly.
I have a slave cylinder on order and I have everything else.
I will let you know how it turns out.
Thanks for all of the good advice and good luck to all of you guys that are tackling this project on your own.
I just about did it myself, but for $500 installed I couldn't pass it up. Drank beer all weekend and the clutch was done, easiest job ever.
