[Z06] 450/400 package
Former Vendor
Joined: Aug 2005
Posts: 16,897
Likes: 412
From: Lewisville TX
St. Jude Donor '03-'04-'05-'06-'07-'08-'09-'10-'11-'12-'13
My car made 436/397 with a G5-X2 cam (from LGM) on a 114 lsa. The car has a vortex intake, kooks 1 3/4ths headers w/ cats, borla stingers, fidanza aluminum flywheel, yella terra ultralite roller rockers and great tuning by Ed Hutchings at Automotive Technology Inc.
EDIT: This is not a ragged edge tune... it's a road racing tune w/ a safe 12.8:1 afr and moderate timing. ALso, running 42 lb injectors as my oem ones were at 106% duty cycle.
EDIT: This is not a ragged edge tune... it's a road racing tune w/ a safe 12.8:1 afr and moderate timing. ALso, running 42 lb injectors as my oem ones were at 106% duty cycle.
You'll just have to get out to VIR and deal w/ the Panoz... just don't tell anyone it's slow 
Team Owner
Joined: Jul 1999
Posts: 50,808
Likes: 10
From: Buy USA products! Check the label! Employ Americans
Tech Contributor
Joined: Jan 2004
Posts: 20,030
Likes: 289
From: Wylie TX --> Less is More, except under the hood !
See my post about heads/cam setup that will knock your socks off on drivability with 447rwhp/427rwtq. I have the same setup basically as "illmac77" above.
http://forums.corvetteforum.com/show....php?t=1882753
Toque
http://forums.corvetteforum.com/show....php?t=1882753
Toque
Burning Brakes
Joined: Sep 2005
Posts: 1,141
Likes: 1
From: Kona, Treasure coast Hawaii, Florida
will the x4 work on a 99 frc that has a mn12 cai bb bullets? going with ls6 intake and ls6 heads. how much power would a setup like this make? I only use this car to race, and terrorise town on the weekends.
