Side Cove Improvement
Le Mans Master
Joined: May 2006
Posts: 5,987
Likes: 18
From: DuBois PA
St. Jude Donor '11-'12-'13-'14-'15
Hillman Hinged Screw Covers #6/8 is what I used I believe... 
Screw covers are from Lowe's and I think they are the #12 size.
http://www.lowes.com/lowes/lkn?action=productDetail&productId=13797 0-37672-881033&lpage=none
Just look through the "drawers" at Lowe's or Home Depot.
The only trick is to NOT sink them in too deeply. they distort if you put them in too far. You will get the hang of it quickly.
Good Luck
http://www.lowes.com/lowes/lkn?action=productDetail&productId=13797 0-37672-881033&lpage=none
Just look through the "drawers" at Lowe's or Home Depot.
The only trick is to NOT sink them in too deeply. they distort if you put them in too far. You will get the hang of it quickly.
Good Luck
Thread Starter
Le Mans Master
Joined: Feb 2003
Posts: 6,683
Likes: 144
From: Memphis Tennessee
Le Mans Master
Joined: May 2006
Posts: 5,987
Likes: 18
From: DuBois PA
St. Jude Donor '11-'12-'13-'14-'15
Yep, you're right #4/6 are the ones for the taillights...
I bought a bunch of #8/10s to use for the Hatch, Door and under Hood screws. I haven't messed with em yet though, I need to paint em body color after I determine they fit.
Tim
I bought a bunch of #8/10s to use for the Hatch, Door and under Hood screws. I haven't messed with em yet though, I need to paint em body color after I determine they fit.
Tim
