XSPower Longtube Header Thread
Drifting
Joined: Aug 2013
Posts: 1,899
Likes: 212
From: Christchurch, New Zealand
I stuck my GoPro next to the exhaust on my Z06 to capture some of the noise. Only modification is the XSPower header system.
C5 Corvette Z06 exhaust sounds - YouTube
C5 Corvette Z06 exhaust sounds - YouTube
pure sex!!!
sounds wicked
Thread Starter
Former Vendor
Joined: Oct 2006
Posts: 7,331
Likes: 61
From: Port Huron MI
We have been doing some test fitting on a 1 7/8" version. I put a set on yesterday and all went in and fit great! Keep posted.
As always, as soon as I have info on TIME and when you can order and when they will be available I will post up.
Plan is looking like the following will be available here very shortly:
1 3/4" with 3" x-pipe, Catted and Offroad
1 7/8" with 3" x-pipe, Catted and Offroad
As always, as soon as I have info on TIME and when you can order and when they will be available I will post up.
Plan is looking like the following will be available here very shortly:
1 3/4" with 3" x-pipe, Catted and Offroad
1 7/8" with 3" x-pipe, Catted and Offroad
Thread Starter
Former Vendor
Joined: Oct 2006
Posts: 7,331
Likes: 61
From: Port Huron MI
Finally have the solution to the clamp issues, they got it right this time, these things rock! I gave them a bunch of "testing" with a 1/2" ratchet with breaker bar on the end and they kept tightening for a great seal and no sign of the bolt struggling with it at all in the clamp 
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski
8 Coolest Corvette Pace Cars (and Replicas) of All Time
Verdad Gallardo
Advanced
Joined: Apr 2013
Posts: 64
Likes: 4
From: Chicago IL
We have been doing some test fitting on a 1 7/8" version. I put a set on yesterday and all went in and fit great! Keep posted.
As always, as soon as I have info on TIME and when you can order and when they will be available I will post up.
Plan is looking like the following will be available here very shortly:
1 3/4" with 3" x-pipe, Catted and Offroad
1 7/8" with 3" x-pipe, Catted and Offroad
As always, as soon as I have info on TIME and when you can order and when they will be available I will post up.
Plan is looking like the following will be available here very shortly:
1 3/4" with 3" x-pipe, Catted and Offroad
1 7/8" with 3" x-pipe, Catted and Offroad
Thread Starter
Former Vendor
Joined: Oct 2006
Posts: 7,331
Likes: 61
From: Port Huron MI
I do not have pricing on the 1 7/8" yet, but they will be the same price as the 1 3/4" or if any more, it won't be much!
I am not sure if their latest version has spikes or not, I will inquire!
Thread Starter
Former Vendor
Joined: Oct 2006
Posts: 7,331
Likes: 61
From: Port Huron MI
Thread Starter
Former Vendor
Joined: Oct 2006
Posts: 7,331
Likes: 61
From: Port Huron MI
Le Mans Master
Joined: Sep 2014
Posts: 5,278
Likes: 539
From: Kelowna BC
I get that, feel for you, must be a bit frustrating. Personally looking at a few options including potentially DIY, and want to start soon. Spring is only so far away and I can only spend a bit of time here and there. Best wishes.
