Brake fluid question
Thread Starter
Drifting
Joined: Apr 2004
Posts: 1,888
Likes: 21
From: Olathe, Kansas
Brake fluid question
I'm about to replace my rotors and pads on my 03', and would like to add stainless steel lines while I've got it apart. How much brake fluid (Dot 3 or Dot 4?) is needed to flush the system, and can anyone recommend a particular brand? I do not track the car, but do drive in a "spirited" manner from time to time!
Safety Car
Joined: Aug 2007
Posts: 4,506
Likes: 0
From: This is not a Song, It's an Outburst: Or, The Establishment Blues; Sixto Diaz Rodriguez
I'm doing the very same thing, replacing same parts right now, plus calipers, and decided to use Amsoil synthetic brake fluid, bought 4 of these, I believe you'll need at least a quart of fluid for a complete flush. 
https://www.amsoil.com/storefront/bf3.aspx
https://www.amsoil.com/storefront/bf3.aspx
