well tell him to hurry up 
Lets start mod the rear bumper!
Thread Starter
Instructor
Joined: Mar 2010
Posts: 107
Likes: 0
From: Vasteras
I forgot to update the thread, i get so mad.. during the summer the bumper was redo for paintjob, what happen.... a heavy shelf falls over it.. 
I fixed the main damages but then my motivation went down, i decided not to give up and fix the damages.. but right now i dont rush anything, its cold here in sweden and the winter arrives.
Next week i start with the (wide body) rear fenders, my new plan is to make fenders and bumper in one piece, i dont like the original seam between them.
Regards
Joakim
I fixed the main damages but then my motivation went down, i decided not to give up and fix the damages.. but right now i dont rush anything, its cold here in sweden and the winter arrives.
Next week i start with the (wide body) rear fenders, my new plan is to make fenders and bumper in one piece, i dont like the original seam between them.
Regards
Joakim
Le Mans Master
Joined: Aug 2009
Posts: 5,197
Likes: 190
From: ALL governments are legalized mobsters, so doesn't matter where I live :(
I forgot to update the thread, i get so mad.. during the summer the bumper was redo for paintjob, what happen.... a heavy shelf falls over it..
I fixed the main damages but then my motivation went down, i decided not to give up and fix the damages.. but right now i dont rush anything, its cold here in sweden and the winter arrives.
Next week i start with the (wide body) rear fenders, my new plan is to make fenders and bumper in one piece, i dont like the original seam between them.
Regards
Joakim
I fixed the main damages but then my motivation went down, i decided not to give up and fix the damages.. but right now i dont rush anything, its cold here in sweden and the winter arrives.
Next week i start with the (wide body) rear fenders, my new plan is to make fenders and bumper in one piece, i dont like the original seam between them.
Regards
Joakim
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Every 2027 Corvette Engine Explained
Joe Kucinski
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette
Verdad Gallardo
10 Ugly Corvettes That We Still Kinda Love
Joe Kucinski
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Racer
Joined: Oct 2010
Posts: 291
Likes: 2
From: Yigo Guam
St. Jude Donor '12-'13
I forgot to update the thread, i get so mad.. during the summer the bumper was redo for paintjob, what happen.... a heavy shelf falls over it..
I fixed the main damages but then my motivation went down, i decided not to give up and fix the damages.. but right now i dont rush anything, its cold here in sweden and the winter arrives.
Next week i start with the (wide body) rear fenders, my new plan is to make fenders and bumper in one piece, i dont like the original seam between them.
Regards
Joakim
I fixed the main damages but then my motivation went down, i decided not to give up and fix the damages.. but right now i dont rush anything, its cold here in sweden and the winter arrives.
Next week i start with the (wide body) rear fenders, my new plan is to make fenders and bumper in one piece, i dont like the original seam between them.
Regards
Joakim
Sorry to hear that....good luck with the rest of the project and Thanks for the update!!
CF Veteran
Joined: Aug 2005
Posts: 1,429
Likes: 19
From: Northern CA
St. Jude Donor '10-'12, '25
I forgot to update the thread, i get so mad.. during the summer the bumper was redo for paintjob, what happen.... a heavy shelf falls over it..
I fixed the main damages but then my motivation went down, i decided not to give up and fix the damages.. but right now i dont rush anything, its cold here in sweden and the winter arrives.
Next week i start with the (wide body) rear fenders, my new plan is to make fenders and bumper in one piece, i dont like the original seam between them.
Regards
Joakim
I fixed the main damages but then my motivation went down, i decided not to give up and fix the damages.. but right now i dont rush anything, its cold here in sweden and the winter arrives.
Next week i start with the (wide body) rear fenders, my new plan is to make fenders and bumper in one piece, i dont like the original seam between them.
Regards
Joakim
The one piece bumper project sounds cool, keep us posted!
Thread Starter
Instructor
Joined: Mar 2010
Posts: 107
Likes: 0
From: Vasteras
Thx Guys!
No filling here.. i want a mold for one solid piece! 
But im making them separatly, after that i put it all to one mold.
(after redoing the rear bumper i feel better doing this, no fun making the old one the same again..)
//J
But im making them separatly, after that i put it all to one mold.
(after redoing the rear bumper i feel better doing this, no fun making the old one the same again..)
//J
Thread Starter
Instructor
Joined: Mar 2010
Posts: 107
Likes: 0
From: Vasteras
red97vette: So a neighbour on the forum! 
Tech: Yes it is.
Jay_Rich: Thx, Mod with glassfiber is really fun and give a good result. my previus car went on the wrong side of the curbs
and the only parts that was intact was the homemade glassfiber products. It gets really strong!
Tech: Yes it is.
Jay_Rich: Thx, Mod with glassfiber is really fun and give a good result. my previus car went on the wrong side of the curbs
and the only parts that was intact was the homemade glassfiber products. It gets really strong!
