Notices
C5 General General C5 Corvette and C5 Z06 Discussion not covered in Tech

Powder coating calipers

Thread Tools
 
Search this Thread
 
Old May 24, 2012 | 12:25 PM
  #1  
GCG's Avatar
GCG
Thread Starter
Melting Slicks
10 Year Member
 
Joined: Jan 2009
Posts: 3,275
Likes: 739
From: Miami FL
Default Powder coating calipers

I'm considering going for this. I have a 50th Anniversary and I'm inclined to get the calipers in the same color as the car. My questions is what to do with the brackets.

What do you guys think would look better, brackets the same color as the calipers, or say flat black to keep them from stealing the thunder from the painted calipers?

What I'm afraid is that brackets with the same color could detract from the overall look. Any opinions?
Reply
Old May 24, 2012 | 02:01 PM
  #2  
MG RED 99's Avatar
MG RED 99
Drifting
10 Year Member
 
Joined: Oct 2003
Posts: 1,932
Likes: 4
From: Warrenville Il
Default

Definitely do the brackets. It looks unfinished without them done, and also makes the caliper look bigger which is a nice benefit.

My car is Magnetic Red but the caliper color is closer to anniversary red, but hard to tell the difference.



Reply
Old May 24, 2012 | 09:09 PM
  #3  
JimZRyd's Avatar
JimZRyd
Melting Slicks
Supporting Member
15 Year Member
Veteran: Reserves
Liked
Community Favorite
 
Joined: Jan 2008
Posts: 2,620
Likes: 81
From: Florence SC
St. Jude Donor '12
Default

I agree 100%! Mine are at Mike the Powdercoaters right now. Definitely do the brackets. Like the above post says, they look undone without the brackets coated too.
Reply
Old May 24, 2012 | 09:40 PM
  #4  
Vetteman Jack's Avatar
Vetteman Jack
Administrator
Supporting Lifetime
Veteran: Navy
St. Jude 20 Year Donor
25 Year Member
Veteran: Reserves
 
Joined: Mar 2001
Posts: 368,636
Likes: 24,868
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '26
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Default

If it were me, I'd do the brackets the same color as the calipers.
Reply
Old May 24, 2012 | 11:03 PM
  #5  
GCG's Avatar
GCG
Thread Starter
Melting Slicks
10 Year Member
 
Joined: Jan 2009
Posts: 3,275
Likes: 739
From: Miami FL
Default

Originally Posted by MG RED 99
...Definitely do the brackets. It looks unfinished without them done, and also makes the caliper look bigger which is a nice benefit...
Originally Posted by jim02C5
I agree 100%! Mine are at Mike the Powdercoaters right now. Definitely do the brackets. Like the above post says, they look undone without the brackets coated too.
Yes, I agree. My intention was always to do the brackets too. What I was wondering was what would look better:
A) calipers and brackets both the same color as the car (50th Anniversary Red)
Or
B) calipers same color as car and brackets flat black to avoid them from "competing" with the calipers.
Reply
Old May 24, 2012 | 11:08 PM
  #6  
ljorges's Avatar
ljorges
Burning Brakes
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Mar 2010
Posts: 921
Likes: 134
From: Chicago Illinois
Default

I just ordered powdercoated calipers for my 50th Anniversary vert. Got them anniversary red with the gold letters. Brackets will also be anniversary red. I'll post pics as soon as I get them.

Les
Reply
Old May 25, 2012 | 03:49 PM
  #7  
JimZRyd's Avatar
JimZRyd
Melting Slicks
Supporting Member
15 Year Member
Veteran: Reserves
Liked
Community Favorite
 
Joined: Jan 2008
Posts: 2,620
Likes: 81
From: Florence SC
St. Jude Donor '12
Default

Originally Posted by GCG
Yes, I agree. My intention was always to do the brackets too. What I was wondering was what would look better:
A) calipers and brackets both the same color as the car (50th Anniversary Red)
Or
B) calipers same color as car and brackets flat black to avoid them from "competing" with the calipers.
I think they look better when BOTH the caliper and bracket are the same color. Still looks "undone" to me if the brackets remain black.
Reply
Old May 25, 2012 | 04:37 PM
  #8  
MG RED 99's Avatar
MG RED 99
Drifting
10 Year Member
 
Joined: Oct 2003
Posts: 1,932
Likes: 4
From: Warrenville Il
Default

Originally Posted by GCG
Yes, I agree. My intention was always to do the brackets too. What I was wondering was what would look better:
A) calipers and brackets both the same color as the car (50th Anniversary Red)
Or
B) calipers same color as car and brackets flat black to avoid them from "competing" with the calipers.
Keep both the same color. The brackets won't be "competing", they will be "complimenting".

I can't tell you how many people have complimented me on the brake calipers. Plus with powdercoating them they will stay clean and shiny forever. It was truely one of the best mods I made.

P.S. also get the stainless steel pad covers too.
Reply
Corvette Stories

The Best of Corvette for Corvette Enthusiasts

story-0

2027 Chevrolet Silverado 1500 First Look: Everything You NEED to Know!

 Michael S. Palmer
story-1

5 Best & 5 Worst Corvette Daily Drivers

 Joe Kucinski
story-2

The Headlights of Every Corvette Generation Explained

 Joe Kucinski
story-3

5 Best & 5 Most Overrated Corvette Track Packages of All Time!

 Joe Kucinski
story-4

Every 2027 Corvette Engine Explained

 Joe Kucinski
story-5

Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette

 Verdad Gallardo
story-6

10 Ugly Corvettes That We Still Kinda Love

 Joe Kucinski
story-7

Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer

 Brett Foote
story-8

10 Things Every Corvette Owner Needs (2026 Edition)

 Michael S. Palmer
story-9

8 Most "Only Corvette Owners Understand" Quirks and Problems

 Pouria Savadkouei
Old May 26, 2012 | 12:10 PM
  #9  
GCG's Avatar
GCG
Thread Starter
Melting Slicks
10 Year Member
 
Joined: Jan 2009
Posts: 3,275
Likes: 739
From: Miami FL
Default

Thank you, guys! I think you are right. I was afraid the overall effect would be negative, but looking at your pictures I agree the brackets end up complementing the calipers.

Good idea the stainless steel pad covers!
Reply
Old May 26, 2012 | 12:11 PM
  #10  
GCG's Avatar
GCG
Thread Starter
Melting Slicks
10 Year Member
 
Joined: Jan 2009
Posts: 3,275
Likes: 739
From: Miami FL
Default

Originally Posted by ljorges
I just ordered powdercoated calipers for my 50th Anniversary vert. Got them anniversary red with the gold letters. Brackets will also be anniversary red. I'll post pics as soon as I get them.

Les
Looking forward to see your pictures!
Reply
Old May 27, 2012 | 11:07 AM
  #11  
GCG's Avatar
GCG
Thread Starter
Melting Slicks
10 Year Member
 
Joined: Jan 2009
Posts: 3,275
Likes: 739
From: Miami FL
Default

Originally Posted by MG RED 99
P.S. also get the stainless steel pad covers too.
Where can I get good quality ones?
Reply
Old May 29, 2012 | 05:06 PM
  #12  
MG RED 99's Avatar
MG RED 99
Drifting
10 Year Member
 
Joined: Oct 2003
Posts: 1,932
Likes: 4
From: Warrenville Il
Default

Originally Posted by GCG
Where can I get good quality ones?
I believe I got them from west coast corvette. My tuner installed them for me along with the rest of the brake equipment at the time. I believe that the taps on the back of the brake pads if they have tabs, may have to be removed, which is not that big of a deal. I can't remember if that was the case on mine or not.
Reply
Old May 29, 2012 | 06:08 PM
  #13  
jrose7004's Avatar
jrose7004
Team Owner
20 Year Member
Liked
Loved
Community Favorite
 
Joined: Mar 2004
Posts: 58,511
Likes: 1,843
From: Oklahoma City OK
C6 of Year Finalist (appearance mods) 2019
Default

I think the brackets done in flat black would look better.
Reply
Old May 29, 2012 | 11:13 PM
  #14  
OkieBikerDude's Avatar
OkieBikerDude
Pro
All Eyes On Me
 
Joined: Sep 2009
Posts: 671
Likes: 10
From: Tulsa OK
Default

When I painted my calipers, I left the brackets in the natural dark gray/flat black for fear of running out of red paint. That was a mistake. I had plenty of paint but by then, I had already masked off the brackets and the calipers were still wet. If I was doing it again or if I was going to the trouble you are, I would paint/coat the brackets the same color as the calipers.

OBD
Reply
Old May 29, 2012 | 11:25 PM
  #15  
K9Leader's Avatar
K9Leader
Burning Brakes
15 Year Member
Photogenic
Liked
Top Answer: 1
 
Joined: Oct 2006
Posts: 1,103
Likes: 472
From: Newark Delaware
Default

Had Mike do mine - Mag Red to match the car with the brackets in silver to match the silver of the Corvette lettering on the caliper. Brackets on mine not as crucial as the Mag Sport Wheels mostly block the brackets. That is actually one of my old wheels - I have a new set since then.

Brackets in same color would be nice, too. Love the AE red and it will look great with this mod.


Reply
Old May 30, 2012 | 08:31 AM
  #16  
GCG's Avatar
GCG
Thread Starter
Melting Slicks
10 Year Member
 
Joined: Jan 2009
Posts: 3,275
Likes: 739
From: Miami FL
Default

Looks very nice!

Your brackets in silver complement your wheels and the lettering very well. Your calipers look outstanding!

The calipers' lettering is silver powder coating or it's just the bare metal letters?

Last edited by GCG; May 30, 2012 at 08:34 AM.
Reply
Old May 30, 2012 | 09:56 AM
  #17  
vcam's Avatar
vcam
Burning Brakes
15 Year Member
Liked
Loved
Community Favorite
 
Joined: Feb 2008
Posts: 926
Likes: 183
From: South Carolina
Default

Just installed my AE Red calipers done by Mike the Powdercoater, very close match for a difficult color and great service as well. I went with both the calipers/brackets same color, with the letters "natural" w/clear over them. My only regret is the stock wheel spokes hide some of them Good luck with yours.....





Reply

Get notified of new replies

To Powder coating calipers

Old May 30, 2012 | 11:58 AM
  #18  
peter pan's Avatar
peter pan
Life Time NCM #2196
Supporting Lifetime
Veteran: Air Force
20 Year Member
Liked
Community Favorite
 
Joined: Sep 2004
Posts: 82,606
Likes: 1,722
From: Converse TX
Default

Originally Posted by Vetteman Jack
If it were me, I'd do the brackets the same color as the calipers.
That is how I did our C5 and now on our C6
Reply
Old May 30, 2012 | 05:32 PM
  #19  
GCG's Avatar
GCG
Thread Starter
Melting Slicks
10 Year Member
 
Joined: Jan 2009
Posts: 3,275
Likes: 739
From: Miami FL
Default

Originally Posted by vcam
Just installed my AE Red calipers done by Mike the Powdercoater, very close match for a difficult color and great service as well. I went with both the calipers/brackets same color, with the letters "natural" w/clear over them. My only regret is the stock wheel spokes hide some of them Good luck with yours....
Very nice, indeed! I really like the way your car looks... as they say, a picture is worth a thousand words!

I was also debating what to do with the letters and you just gave me the answer: clear over them!
Reply
Old May 31, 2012 | 05:32 PM
  #20  
JimZRyd's Avatar
JimZRyd
Melting Slicks
Supporting Member
15 Year Member
Veteran: Reserves
Liked
Community Favorite
 
Joined: Jan 2008
Posts: 2,620
Likes: 81
From: Florence SC
St. Jude Donor '12
Default

Just got mine back from Mike today. WOW! Beautiful work! As soon as my Eradispeeds come in I'll get them installed and post pics
Reply



All times are GMT -4. The time now is 04:42 AM.

story-0
2027 Chevrolet Silverado 1500 First Look: Everything You NEED to Know!

Slideshow: Is the 2027 Chevrolet Silverado 1500 the best Silverado yet?

By Michael S. Palmer | 2026-06-16 08:01:12


VIEW MORE
story-1
5 Best & 5 Worst Corvette Daily Drivers

Slideshow: 5 best and 5 worst Corvette daily drivers

By Joe Kucinski | 2026-06-15 10:32:13


VIEW MORE
story-2
The Headlights of Every Corvette Generation Explained

Slideshow: The headlights of every Corvette generation explained

By Joe Kucinski | 2026-06-15 10:17:14


VIEW MORE
story-3
5 Best & 5 Most Overrated Corvette Track Packages of All Time!

Slideshow: The 5 best and 5 most overrated Corvette track packages ever.

By Joe Kucinski | 2026-06-09 12:46:45


VIEW MORE
story-4
Every 2027 Corvette Engine Explained

Slideshow: Every 2027 Corvette engine explained

By Joe Kucinski | 2026-06-09 12:16:31


VIEW MORE
story-5
Designer Imagines A Corvette That Looks More Like a Corvette Than the Corvette

Slideshow: A Jaguar designer's personal project imagines what a modern front-engined Corvette might look like if Chevrolet revisited the golden age of the Stingray.

By Verdad Gallardo | 2026-06-08 19:53:43


VIEW MORE
story-6
10 Ugly Corvettes That We Still Kinda Love

Slideshow: 10 ugly Corvettes that we still kinda love.

By Joe Kucinski | 2026-06-03 10:34:17


VIEW MORE
story-7
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer

A lot of money has changed hands at the online auction house over the years.

By Brett Foote | 2026-06-03 10:21:50


VIEW MORE
story-8
10 Things Every Corvette Owner Needs (2026 Edition)

Slideshow: 10 great gifts Corvette enthusiasts actually want for Father's Day!

By Michael S. Palmer | 2026-06-03 15:43:40


VIEW MORE
story-9
8 Most "Only Corvette Owners Understand" Quirks and Problems

Slideshow: These are the quirks, annoyances, and oddly lovable problems that every Corvette owner eventually learns to live with.

By Pouria Savadkouei | 2026-05-28 09:31:39


VIEW MORE