Ignition Bezel
Thread Starter
Advanced
Joined: Oct 2011
Posts: 69
Likes: 3
Ignition Bezel
Quick question. How does the bezel attach to the ignition switch? Mine flops all about, I think something broke on it but I'm not quite sure what. I can't seem to get mine to stick to the switch.
Le Mans Master
Joined: May 2007
Posts: 5,393
Likes: 17
From: Belleville Mich.
You have some work to do, to get to where this ignition switch bezel lives.
Top link is a picture of the part & price.
Notice the small hole in the part
That's most likely broke on yours.
Second link is instructions on how to get to it.
http://www.ebay.com/itm/1997-2004-Co...em=29073528516.
http://www.vetteessentials.com/instr...zel_howto.html.
Top link is a picture of the part & price.
Notice the small hole in the part
That's most likely broke on yours.
Second link is instructions on how to get to it.
http://www.ebay.com/itm/1997-2004-Co...em=29073528516.
http://www.vetteessentials.com/instr...zel_howto.html.
Race Director
Joined: May 2012
Posts: 15,768
Likes: 3,283
From: Phoenix area, AZ
The bezel has three slotted openings on the back that line up with three pins on the ignition key cylinder and snap in place. If yours is moving it either came loose from the pins or the tabs of the slotted openings broke. Either way you will need to remove the radio/HVAC bezel to reveal the ignition switch bezel. Before removing the bezel pay close attention to the plastic cord that wraps around behind it so you'll know how to reassemble it correctly.
Administrator
Joined: Mar 2001
Posts: 368,415
Likes: 24,798
From: In a parallel universe. Currently own 2014 Stingray Coupe.
C7 of the Year - Modified Finalist 2021
MO Events Coordinator
St. Jude Co-Organizer
St. Jude Donor '03 thru '26
NCM Sinkhole Donor
CI 5, 8 & 11 Veteran
Good info. 
Instructor
Joined: Nov 2011
Posts: 195
Likes: 7
From: Sneads Ferry NC
Le Mans Master
Joined: May 2007
Posts: 5,393
Likes: 17
From: Belleville Mich.
X Ravin,
Evidently the last time it was taken apart, it was not properly reinstalled.
Zoom in on this picture.
Note the hole/pin in the bezel.
Note the flat sealing surface on the outer edge of the bezel.
Also panel may not have been reinstalled properly to push against the
sealing surface of the bezel.
http://www.vetteessentials.com/instr...010013rann.jpg
Evidently the last time it was taken apart, it was not properly reinstalled.
Zoom in on this picture.
Note the hole/pin in the bezel.
Note the flat sealing surface on the outer edge of the bezel.
Also panel may not have been reinstalled properly to push against the
sealing surface of the bezel.
http://www.vetteessentials.com/instr...010013rann.jpg
Safety Car
Joined: Aug 2007
Posts: 4,506
Likes: 0
From: This is not a Song, It's an Outburst: Or, The Establishment Blues; Sixto Diaz Rodriguez
You have some work to do, to get to where this ignition switch bezel lives.
http://www.ebay.com/itm/1997-2004-Co...em=29073528516.
http://www.vetteessentials.com/instr...zel_howto.html.
http://www.ebay.com/itm/1997-2004-Co...em=29073528516.
http://www.vetteessentials.com/instr...zel_howto.html.
Good info. Top link has a lot of OEM parts for the interior.
Burning Brakes
Joined: Feb 2007
Posts: 1,211
Likes: 4
From: Vancouver B.C.
Corvette Stories
The Best of Corvette for Corvette Enthusiasts
Top 10 Most Expensive Corvettes Ever Sold on Bring A Trailer
Brett Foote
10 Things Every Corvette Owner Needs (2026 Edition)
Michael S. Palmer
8 Most "Only Corvette Owners Understand" Quirks and Problems
Pouria Savadkouei
10 Reasons the C6 Z06 is Still A Performance Benchmark After 20 Years
Joe Kucinski
How Much Horsepower Every Corvette Engine "LOST" in 1972
Joe Kucinski
Top 10 DOs and DON'Ts for Protecting Your Convertible Top!
Michael S. Palmer
Top 10 Most Explosive Corvettes Ever Made: Power-to-Weight Ratio Ranked!
Joe Kucinski
150 hp to 1,250 hp: Every Corvette Generation Compared by the Specs That Matter
Joe Kucinski