Lean Condition - Diagnosed
Thread Starter
Melting Slicks
Joined: Nov 2011
Posts: 2,789
Likes: 3
From: Jacksonville FL
Lean Condition - Diagnosed
Since my last tune I have several times had lean codes pop up. I decided to have it checked and sure enough we found that the air bridge was cracked, thereby triggering the leanness.
I thought about replacing the air bridge with a nice CF decorative one but if i am going to do a blower soon then that would be a waste. So, we just resealed the crack in the air bridge and she's going back on the dyno today. This may explain why I was on the short side of the power range given the parts installed. I might have found the reason and some newfound free HP as well.
We shall see...
I thought about replacing the air bridge with a nice CF decorative one but if i am going to do a blower soon then that would be a waste. So, we just resealed the crack in the air bridge and she's going back on the dyno today. This may explain why I was on the short side of the power range given the parts installed. I might have found the reason and some newfound free HP as well.
We shall see...
