When you click on links to various merchants on this site and make a purchase, this can result in this site earning a commission. Affiliate programs and affiliations include, but are not limited to, the eBay Partner Network.
Has anyone here done the programming that is described in the instructions? I am puzzled by the instructions that speak of entering numbers into the DIC. How does that work? I don't see a numbered keypad on my instrument panel.
Hmmm, I went through the installation instructions. It looks like I wasted my time, all I ever wanted was to control the windows. Swapped it over when I sold the '97 to buy the '03. I wonder if it will work on a C6 if I upgrade. I wouldn't have one without it, even a coupe.
Has anyone here done the programming that is described in the instructions? I am puzzled by the instructions that speak of entering numbers into the DIC. How does that work? I don't see a numbered keypad on my instrument panel.
The buttons on my 2000 DIC are numbered, the options button i.e. is #4. I did the basic program but the windows worked fine without the program.
From: Reno is so close to Hell you can see Sparks , State Of Confusion
St. Jude Donor '12-'13-'14
Word of advice, When you lock the car make sure the windows don't go back down, You might have to program the closed position in the valet. A lot will go up and then right back down due to not having it set up.
Well that has to be the easiest mod since door edge guards. The instruction that said "no tools required" should have been a clue. And yes, my buttons have numbers on them, I just never noticed . . . .