[Z06] Valve spring replacement
Thread Starter
Burning Brakes
Joined: Jul 2014
Posts: 801
Likes: 31
Valve spring replacement
I have a late model 2003 Z06 that I just found out has yellow valve springs. I want to get this taken care of at some point. What are a good set of valve springs I should use? Also I would replace the valve seals as well.
Banned Scam/Spammer
Joined: May 2007
Posts: 15,685
Likes: 1,330
From: Machineguns, because I don’t compromise
Here's a set of factory blues for $73 @ summit
https://www.summitracing.com/parts/nal-12499224
This valve spring tool is much better than most cheap methods out there and you recan use it many times.
https://www.summitracing.com/parts/pro-67605
Added exhaust valve stem seals
https://www.summitracing.com/parts/mah-ss45920
and intake valve stem seals
https://www.summitracing.com/parts/mah-ss45921
https://www.summitracing.com/parts/nal-12499224
This valve spring tool is much better than most cheap methods out there and you recan use it many times.
https://www.summitracing.com/parts/pro-67605
Added exhaust valve stem seals
https://www.summitracing.com/parts/mah-ss45920
and intake valve stem seals
https://www.summitracing.com/parts/mah-ss45921
Last edited by ~Josh; Apr 7, 2018 at 09:30 AM. Reason: &*%*$#$(^_&_
Banned Scam/Spammer
Joined: May 2007
Posts: 15,685
Likes: 1,330
From: Machineguns, because I don’t compromise
Maybe the air tool as it will be part of a compression gauge set but the valve spring tool no. They will have a cheap claw style that's more like a disposable razor than a tool. If the spring pops out of that contraption it can break your teeth or lose and eye.
